Series YB2

22mm Panel Seal Pushbuttons

www.nkk.com

D114

D

Electrical Capacity (Resistive Load)

Power Level (silver):

3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC

Logic Level (gold):

0.4VA maximum @ 28V AC/DC maximum

(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

Other Ratings

Contact Resistance:

50 milliohms maximum for silver; 100 milliohms maximum for gold

Insulation Resistance:

200 megohms minimum @ 500V DC

Dielectric Strength:

1,000V AC minimum between contacts for 1 minute minimum;

1,500V AC minimum between contacts & case for 1 minute minimum

Mechanical Life:

1,000,000 operations minimum for momentary circuit

200,000 operations minimum for maintained circuit

Electrical Life:

100,000 operations minimum

Nominal Operating Force:

Single pole: 1.5N

Double pole: 3.0N

Contact Timing:

Nonshorting (break-before-make)

Travel:

Pretravel .059” (1.5mm); Overtravel .059” (1.5mm); Total Travel .118” (3.0mm)

Materials & Finishes

Bezel:

Black: Glass fiber reinforced polyamide (UL94V-0); Silver: Polycarbonate

Housing:

Glass fiber reinforced polyamide (UL94V-0)

Base:

Diallyl phthalate resin (UL94V-0)

Movable Contactor:

Phosphor bronze with silver or gold plating

Movable Contacts:

Phosphor bronze & silver alloy

Stationary Contacts:

Silver alloy or copper with gold plating

Switch Terminals:

Phosphor bronze with tin plating

Lamp Terminals:

Phosphor bronze with tin plating

Environmental Data

Operating Temperature Range:

–25°C through +50°C (–13°F through +122°F) for Illuminated

–25°C through +70°C (–13°F through +158°F) for Nonilluminated

Humidity:

90 ~ 95% humidity for 96 hours @ 40°C (104°F)

Vibration:

10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning

in 1 minute; 3 right angled directions for 2 hours

Shock:

Sealing:

IP65 of IEC60529 standard

Installation

Mounting Torque:

Soldering Time & Temperature:

Manual Soldering: 390°C maximum for 4 seconds maximum

Standards & Certifications

Flammability Standards:

UL94V-0 housing, base & black or metallic silver bezel

UL:

File No. E44145

All solder lug models recognized at 3A @ 125/250V AC or 0.4VA @ 28V AC/DC maximum.

Add “/CUL” to end of part number to order cULus mark on switch.