VCS3 Data Sheet

Vectron International 267 Lowell Rd, Hudson NH 03051

Tel: 1-88-VECTRON-1

e-mail vectron@vectron.com

Enable/Disable Functional Description

Under normal operation the Enable/Disable is left open or set to a logic high state. When the E/D is set to

a logic low, the oscillator stops and the output is in a high impedance state. This helps reduce power

consumption as well as facilitating board testing and troubleshooting.

Tri-state Functional Description

Under normal operation the tri-state is left open or set to a logic high state. When the tri-state is set to a

logic low, the oscillator remains active but the output buffer is in a high impedance state. This helps

facilitate board testing and troubleshooting.

Table 4. Outline Diagrams, Pad Layout and Pin Out

Pin #

Symbol

Function

1

E/D

Tri-state, Enable/Disable

2

GND

Electrical and Case Ground

3

Output Frequency

4

Supply Voltage

Contact Pads are gold over nickel

Figure 7, Package drawing

YYM T