5

ã 2000 Semtech Corp.

www.semtech.com

PROTECTION PRODUCTS

SMS05C THRU SMS24C

SMSxxC Circuit Diagram

Protection of Five Unidirectional Lines

Device Connection for Protection of Five Data Lines

The SMSxxC is designed to protect up to five unidirec-

tional data lines. The device is connected as follows:

1. Unidirectional protection of five I/O lines is

achieved by connecting pins 1, 3, 4, 5 and 6 to the

data lines. Pin 2 is connected to ground. The

ground connection should be made directly to the

ground plane for best results. The path length is

kept as short as possible to reduce the effects of

parasitic inductance in the board traces.

Circuit Board Layout Recommendations for Suppres-

sion of ESD.

Good circuit board layout is critical for the suppression

of ESD induced transients. The following guidelines are

recommended:

l

Place the SMSxxC near the input terminals or

connectors to restrict transient coupling.

l

Minimize the path length between the SMSxxC and

the protected line.

l

Minimize all conductive loops including power and

ground loops.

l

The ESD transient return path to ground should be

kept as short as possible.

l

Never run critical signals near board edges.

l

Use ground planes whenever possible.

Applications Information