TRSL-9102G datasheet(2/4 Pages) OPTOWAY

2 / 4 page

Optoway

TRSL-9102G

**********************************************************************************************************************************************************************

*********************************************************************************************************************************************************************

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798

Fax: 886-3-5979737

E-mail: sales@optoway.com.tw http: // www.optoway.com.tw

1/1/2011 V4.0

Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)

Parameter

Symbol

Min

Typ

Max

Units

Notes

Optical

Optical Transmit Power

-9.5

---

-3

dBm

Output Center Wavelength

1270

1310

1360

Output Spectrum Width

∆λ

---

RMS (σ)

Extinction Ratio

8.2

---

Output Eye

Compliant with Bellcore GR-253-CORE and ITU recommendation G.957

Optical Rise Time

150

20% to 80% Values

Optical Fall Time

150

20% to 80% Values

Relative Intensity Noise

RIN

-120

dB/Hz

Electrical

Power Supply Current

Icc

140

Data Input Current – Low

IIL

-350

µA

Data Input Current – High

IIH

350

µA

Differential Input Voltage

VIH - VIL

300

Data Input Voltage – Low

VIL - VCC

-2.0

-1.58

Data Input Voltage -- High

VIH - VCC

-1.1

-0.74

Disable Input Voltage -- Low

VTDIS,L

0.5

TX Output Enabled

Disable Input Voltage -- High

VTDIS,H

Vcc – 1.3

Vcc

TX Ouput Disabled

Shut Off Time for TxDis

tDIS

Notes: 1. Output power is power coupled into a 9/125

µm single mode fiber.

2. Maximum current is specified at Vcc = Maximum @ maximum temperature.

3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.

Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V)

Parameter

Symbol

Min

Typ

Max

Units

Notes

Optical

Sensitivity

---

-18

dBm

Maximum Input Power

-3

---

dBm

Signal Detect -- Asserted

---

-18

dBm

Transition: low to high

Signal Detect -- Deasserted

-30

---

dBm

Transition: high to low

Signal detect -- Hysteresis

1.0

---

Wavelength of Operation

1100

---

1600

Electrical

Power Supply Current

Icc

100

Data Output Voltage – Low

VOL - VCC

-2.0

-1.58

Data Output Voltage – High

VOH - VCC

-1.1

-0.74

Signal Detect Output Voltage -- Low

VOL

0.8

Signal Detect Output Voltage -- High

VOH

2.0

Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS.

2. The current excludes the output load current.

3. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.

TRSL-9102G 数据表(PDF) 2 Page - Optoway Technology Inc

TRSL-9102G 数据表(HTML) 2 Page - Optoway Technology Inc

Html Pages

1 2 3 4

数据表下载