For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7

7 - 5

Pin Number

Function

Description

Interface Schematic

1, 4, 5, 7, 9,

12 - 14, 16

N/C

No connection necessary. These pins may be connected

to RF/DC ground. Performance will not be affected.

2RFIN

This pin is matched to 50 Ohms with a 47 nH

inductor to ground. See application circuit.

3, 6, 10

GND

These pins and package bottom must be

connected to RF/DC ground.

8Res

This pin is used to set the DC current of the amplifier

by selection of external bias resistor.

See application circuit.

11

RFOUT

This pin is AC coupled and matched

to 50 Ohms from 0.7 - 1.0 GHz.

15

Vdd

Power supply voltage. Choke inductor and bypass

capacitors are required. See application circuit.

Pin Descriptions

Application Circuit

Note 1: L1, L2 and C1 should be located as close to the pins as possible.

GaAs PHEMT MMIC LOW NOISE

AMPLIFIER, 700 - 1000 MHz

v01.0610