Rev.08.04.11_77

iMP Series

8 of 9

Embedded Power for

Business-Critical Continuity

313

process

yellow

3405

1797

1375

116

2607

652

242

2985

375

240

x

y

xx

x

y

y

y

171.45

171.45

177.8

19.05

M4 MOUNTING HOLES (4X)

MARKED AS X

#8-32 MOUNTING HOLES

(4X) MARKED AS Y

M4 MOUNTING HOLES (4X)

IDENTICAL BOTH SIDES

38.10

Normal Air Flow

Reverse Air Flow

8-Inch Case Size: iMP1: 2.5” x 8” x 11” (63.5mm x 203.2mm x 279.4mm)

Weight: iMP1Case:5.0lb.•210WSingle:0.6lb.

•360WSingle:1.0lb.•750WSingle:1.6lb.

•144WDual:0.6lb.

Notes

1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs (0.67 N-m).

2. Control connectors: (J1) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts (Molex C - Grid III Series).

Connector kit includes mating connector and 10 pins, Astec part #70-841-004. (J2) 10 position housing (Landwin 2051P1000T). Mates with housing 2050S1000 (Landwin) with

2053T011P (Landwin) pins or JST PHDR-IOVS Housing and JST SPHD-002T-PO.5 pins.

3. Chassis material: aluminum with chemical film coating (conductive).

4. All dimensions are in millimeters and inches, and are typical.

5. Customer mounting -3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.150” (3.8 mm). Max. torque: 5 in-lbs. (0.57 N-m).

6. Output module connections: All single O/P modules are M4 x 8mm screws. Max. torque: 10 in-lbs. (1.13 N-m).

Dual O/P module is M3 x 8mm screws. Max. torque: 5 in-lbs. (0.57 N-m).

i

MP Series

i

MP1 (1200/1500 Watts Max)