| 数据搜索系统,热门电子元器件搜索 |
|
705-5100-F21 数据表(PDF) 7 Page - Magnetrol International, Inc. |
|
|
|||||||||||||||||||||||||||||
705-5100-F21 数据表(HTML) 7 Page - Magnetrol International, Inc. |
|
7 / 52 page ![]() IEC61158 also supports the Fieldbus Intrinsically Safe Concept (FISCO) model which allows more field devices in a network. The FISCO model considers the capacitance and inductance of the wiring to be distributed along its entire length. Therefore, the stored energy during a fault will be less and more devices are permitted on a pair of wires. Instead of the conservative entity model, which only allows about 90 mA of current, the FISCO model allows a maxi- mum of 110 mA for Class II C installations and 240 mA for Class II B installations. FISCO certifying agencies have limited the maximum segment length to 1000 meters because the FISCO model does not rely on standardized ignition curves. The Enhanced Eclipse Model 705 is available with entity IS, FISCO IS, FNICO non-incendive, or explosion proof approvals. 2.0 QuickStart Installation The QuickStart Installation procedures provide the key steps for mounting, wiring, and configuring the Eclipse level transmitter. These procedures are intended for experi- enced installers of electronic level measurement instruments. See Complete Installation, Section 3.0, for detailed installa- tion instructions. WARNING: The Model 7xD, 7xR or 7xT overfill probes should be used for Safety Shutdown/Overfill applications. All other Guided Wave Radar probes should be installed so the maximum overfill level is a minimum of 6" (150 mm) below the process connection. This may include utilizing a nozzle or spool piece to raise the probe. Consult factory to ensure proper installation. 2.1 Getting Started Before beginning the QuickStart Installation procedures, have the proper equipment, tools, and information available. 2.1.1 Equipment and Tools • Open-end wrenches or adjustable wrench to fit the process connection size and type. Coaxial probe 11⁄2" (38 mm), twin rod probe 17⁄8" (47 mm), transmitter 11⁄2" (38 mm). A torque wrench is highly desirable. • Flat-blade screwdriver • Cable cutter and 3⁄32" (2.5 mm) hex wrench (Flexible probes only) • Fieldbus-compatible power supply with proper termination 7 57-645 Eclipse Guided Wave Radar Transmitter - PROFIBUS PA™ |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |