10

Twin-Tip Sensor

Spherical-Tip Sensor

High-Temperature Sensor

Low Flow Body Sensor

General Use:

General purpose and corrosive resistant applications

Material Options:

316 stainless steel, Hastelloy C-276, or Monel

Process Connections:

NPT threads, G threads, ANSI flanges, EN/DIN flanges

Max Temperature:

+400° F (+200° C)

Max Pressure:

3,000 psig (207 bar) – 1850 psi (127 bar) extended length

Insertion Lengths:

2 to 130 inches (50 to 3,300 mm)

General Use:

General purpose service and high-viscosity applications

Material:

316 stainless steel

Process Connections:

NPT threads, G threads, ANSI flanges, EN/DIN flanges, hygienic

Max Temperature:

+400° F (+200° C)

Max Pressure:

600 psi (40 bar)

Insertion Lengths:

2 to 130 inches (50 to 3,300 mm)

General Use:

For high-temperature process environments

Material:

316 stainless steel; Hastelloy C-276

Process Connections:

NPT threads, G threads, ANSI flanges, EN/DIN flanges

Max Temperature:

+850° F (+454° C)

Max Pressure:

6,000 psi (413 bar)

Insertion Lengths:

2 to 36 inches (50 to 900 mm)

General Use:

Low flow detection; suitable for chemical

feed pumps, additive flow, pump seals,

process analyzers

Material:

316 stainless steel

Flow Rate:

0.055 to 3 gallons/hour

(0.02 to 11.5 liters/hr.)

Process Connections:

1

Max Temperature:

+400° F (+200° C)

Max Pressure:

5,800 psi (400 bar)

Twin-Tip Sensors are mounted at the end of each tip.

Spherical Sensors are bonded directly to the wall of

the tip for greater sensitivity and sensor protection.

Probe pressure and temperature ratings are dependent

upon process connection; maximum pressure and

temperature ratings are shown below.

Mini Sensor

General Use:

Material:

316 stainless steel

Max Temperature:

+400° F (+200° C)

Max Pressure:

3,000 psig (207 bar) – 1850 psi (127 bar) extended length

Insertion Length:

1 to 130 inches (25 to 3300 mm)