TND017MP / SW

No.6481-5/6

Sample Application Circuit

Another Sample Application Circuit (Solenoid drive)

Operation Description

•

The output power MOSFET will be turned on when the input voltage exceeds the input threshold voltage (4 to 6V

is recommended), and then the lamp will be turned on by the current flowing to the lamp. Conversely, the output

power MOSFET will be turned off when the input voltage goes below the input threshold voltage, and the lamp

will be turned off.

•

The inrush current that occurs during normal lamp operation is limited to a preset value by the built-in overcurrent

protecting circuit, which makes the lamp life longer.

•

The internal overcurrent protection function limits the current of output power MOSFET when output current of at

least the overcurrent detecting current value flows at load short. Besides, if the device temperature exceeds the

allowable power dissipation, overheat protection function protects the power switch from being broken down by

shutting down the MOSFET when Tj comes to 150

°C (typical).

•

Shutdown state will be kept after overheat protection operation and the system will be reset when the input

voltage goes to or below the reset voltage (1V).

•

As an example of application circuit, DC voltage can also be controlled as a solenoid drive.

Addition

•

The diode between OUT and GND in the block diagram is parasitic diode of the MOSFET.

•

Not apply a voltage on IN terminal during the period when OUT voltage is lower then GND voltage when driving

a solenoid or a motor.

•

Be sure connect a diode between OUT terminal and GND terminal when you want to apply a voltage on IN

terminal under the above-stated state (that is, OUT Voltage < GND Voltage).

AC100V

AC24V

OUT

IN

TND017MP / SW

5V 5V

IN 1

OUT 1

OUT 2

GND 1, 2

IN 2

5V

GND

TND017SW

Lamp

Lamp

Lamp

Micro-

controller

Micro-

controller

Micro-

controller

AC100V

AC24V

OUT

IN

TND017MP / SW

5V 5V

IN 1

OUT 1

OUT 2

GND 1, 2

IN 2

5V

GND

TND017SW

Solenoid

Solenoid

Micro-

controller

Micro-

controller

Micro-

controller