UNISONIC TECHNOLOGIES CO., LTD

M1008

Preliminary

CMOS IC

www.unisonic.com.tw

1 of 11

Copyright © 2010 Unisonic Technologies Co., Ltd

QW-R502-434.a

16-BIT CCD/CIS ANALOG

SIGNAL PROCESSOR

DESCRIPTION

The M1008 is a 16-bit CCD/CIS analog signal processor for

imaging applications. A 3-channel architecture is designed to sample

and control the outputs of tri-linear color CCD arrays. Each channel

processes one color analog signal and includes an input clamp,

Correlated Double Sampler (CDS), offset DAC and Programmable

Gain Amplifier (PGA), and a 16-bit A/D converter.

If there are sensors such as Contact Image Sensors (CIS) and

CMOS active pixel sensors, the CDS amplifiers are not necessary.

The 16-bit digital output is composed of high and low 8-bit

output and is assessed by two reading cycles. The internal registers

are programmed by a 3-wire serial interface which provides gain,

offset and operating mode adjustments.

The typical operation power of M1008 is 400mW in 5V power

supply.

FEATURES

* 400mW In 5V Operation Supply

* Under 2mA Power-Down Mode

* Built-In16-Bit 30 Msps A/D Converter

* No Missing Codes

* Input Clamp Circuitry

* Correlated Double Sampling

* Programmable Gain

* 250mV Programmable Offset

* Built-In Voltage Reference

* Programmable 3-Wire Serial Interface

* 3V/5V Digital I/O Compatibility

* Up To 25 Msps In 1-Channel Operation

* Up To 30 Msps In 2-Channel (Even-Odd) Operation

* Up To 30 Msps In 3-Channel Operation

ORDERING INFORMATION

Ordering Number

Package

Packing

M1008G-P28-T

TSSOP-28

Tube

M1008G-P28-R

TSSOP-28

Tape Reel

M1008G-P28-T

(1) Packing Type

(2) Package Type

(3) Halogen Free

(1) T: Tube, R: Tape Reel

(2) P28: TSSOP-28

(3) G: Halogen Free

TSSOP-28