UN1596

Preliminary

NPN SILICON TRANSISTOR

UNISONICTECHNOLOGIESCO.,LTD

2 of 2

www.unisonic.com.tw

QW-R207-021.b

ABSOLUTE MAXIMUM RATINGS

PARAMETER

SYMBOL

RATINGS

UNIT

Collector-Base Voltage

180

V

Collector-Emitter Voltage

180

V

Emitter-Base Voltage

5

V

Collector Current

0.5

A

Peak Pulse Current

1

A

Collector Power dissipation

2

W

Junction Temperature

+150

°С

Storage Temperature

−55 ~ +150

°С

Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.

Absolute maximum ratings are stress ratings only and functional device operation is not implied.

PARAMETER

SYMBOL

TEST CONDITIONS

MIN

TYP

MAX UNIT

Collector-Base Breakdown Voltage

180

V

Collector-Emitter Breakdown Voltage

180

V

Emitter-Base Breakdown Voltage

5

V

Base-Emitter Turn-On Voltage

0.9

V

Collector Cutoff Current

100

nA

Emitter Cutoff Current

100

nA

ON CHARACTERISTICS

Collector-Emitter Saturation Voltage

0.2

V

0.2

0.25

Base-Emitter Saturation Voltage

0.9

V

DC Current Transfer Ratio

500

150

SMALL-SIGNAL CHARACTERISTICS

Transition Frequency

70

MHz

Input Capacitance

200

pF

Output Capacitance

6

pF

Switching Times

80

ns

4400

Note: Pulse width=300μs. Duty cycle≦2%

UTC assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or

other parameters) listed in products specifications of any and all UTC products described or contained

herein. UTC products are not designed for use in life support appliances, devices or systems where

malfunction of these products can be reasonably expected to result in personal injury. Reproduction in

whole or in part is prohibited without the prior written consent of the copyright owner. The information

presented in this document does not form part of any quotation or contract, is believed to be accurate

and reliable and may be changed without notice.