www.dialight.com

Occupancy Sensor Version

Dimensions in Inches [mm]

Mechanical, Electrical and Photometric information is the same

as on page 3 except where detail is provided

Fixture Weight:

19lbs (11.34kg)

Container Weight:

25lbs (8.62kg)

Sensor Mounting:

Attached to the base of the neck using

a semi-rigid flexible conduit

Occupancy Sensor:

Dry location Leviton OSFHU - CTW (120 - 347V AC)

or C4W (480V AC)

Wet location Wattstopper HB350W (120 – 347V AC)

or HB340W (480V AC)

Sensor Timing:

30 seconds to 20 minutes

Sensor Lens Options:

Comes complete with interchangeable lenses

for multiple mounting heights

Operating Temperature

Leviton models:

Wattstopper models:

4

Features and Benefits

for optimal coverage

applications

Mechanical, Electrical and Photometric information is the same

as on page 3 except where detail is provided

Variable Dimming Cable:

Two conductor cable

Power Cable:

Three conductor cable

Dimming Cable Position:

Side of the neck through a cable gland

Variable Dimming Control: 0-10 V DC active

Dimming Range:

10 V DC = 100% light output

0 V DC = 15% light output

Variable Dimming (0-10 VDC) & STEP Dimming

Dimensions in Inches [mm]

8.00

(203,2)

1.91

(48,6)

10’ (3.05m)

Power Cord

10’ (3.05m)

DIMMIMG CABLE

5/16” - 18 X .75”

THREADED HOLE (2)

1/4” - 20 SELF - TAPPING

SCREW HOLE (6)

Ø 16.0

(406)

3.13

(79,4)

STEP Dimming Mode

The variable dimming High Bays may also be configured to operate

in a single STEP Dimming configuration. When the dimming control

conductors are connected together, the light output will be reduced

to approximately 15% of the maximum light output. The total fixture

power consumption will also be reduced to approximately 20% (30

W). Connecting the leads together can be accomplished with a

common wall switch.

Features and Benefits

configuration