ELM327P datasheet(5/76 Pages) ELM

5 / 76 page

Absolute Maximum Ratings

Storage Temperature....................... -65°C to +150°C

Ambient Temperature with

Power Applied....................................-40°C to +85°C

Voltage on VDD with respect to VSS..... -0.3V to +7.5V

Voltage on any other pin with

respect to VSS........................... -0.3V to (VDD + 0.3V)

Note:

These values are given as a design guideline only.

The ability to operate to these levels is neither

inferred nor recommended, and stresses beyond

those listed here will likely damage the device.

5 of 76

ELM327DSH

Elm Electronics – Circuits for the Hobbyist

www.elmelectronics.com

These integrated circuits are 28 pin devices, available in either a 300 mil wide plastic (‘skinny’) DIP format or in a

300 mil (7.50 mm body) SOIC surface mount type of package. We do not offer an option for QFN packages.

To order, add the appropriate suffix to the part number:

300 mil 28 pin Plastic DIP..............................ELM327P

300 mil 28 pin SOIC....................................ELM327SM

ELM327

If unused, pin 24 must be connected to a logic high

(VDD) level.

RS232 Rx LED (pin 25), RS232 Tx LED (pin 26),

OBD Rx LED (pin 27) and OBD Tx LED (pin 28)

These four output pins are normally high, and are

driven to low levels when the ELM327 is transmitting

or receiving data. These outputs are suitable for

directly driving most LEDs through current limiting

resistors, or interfacing to other logic circuits. If

unused, these pins may be left open-circuited.

Note that pin 28 can also be used to turn off all of the

Programmable Parameters, if you can not do so by

using the normal interface - see pages 54 and 55 for

more details.

Pin Descriptions (continued)

Unused Pins

When people only want to implement a portion of what the ELM327 is capable of, they often ask what to do with the

unused pins. The rule is that unused outputs may be left open-circuited with nothing connected to them, but unused

inputs must be terminated. The ELM327 is a CMOS integrated circuit that can not have any inputs left floating (or

you might damage the IC). Connect unused inputs as follows:

Level

Note that the inputs that are shown with an asterisk (*) may be connected to either a High (VDD) or a Low (VSS)

level, but the level shown is preferred.

Ordering Information

ELM327P 数据表(PDF) 5 Page - ELM Electronics

ELM327P 数据表(HTML) 5 Page - ELM Electronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

数据表下载