| 数据搜索系统,热门电子元器件搜索 |
|
SP3243EHCT 数据表(PDF) 10 Page - Sipex Corporation |
|
|
|||||||||||||||||||||||||||||
SP3243EHCT 数据表(HTML) 10 Page - Sipex Corporation |
|
10 / 24 page ![]() SP3223EHDS/11 SP3223EH +3.0V to +5.5V RS-232 Transceivers © Copyright 2000 Sipex Corporation 10 DESCRIPTION The SP3223EH and SP3243EH transceivers meet the EIA/TIA-232 and ITU-T V.28/V.24 communication protocols and can be implemented in battery-powered, portable, or hand-held applications such as notebook or palmtop computers. The SP3223EH and SP3243EH devices feature Sipex's proprietary and patented (U.S.-- 5,306,954) on-board charge pump circuitry that generates +5.5V RS-232 voltage levels from a single +3.0V to +5.5V power supply. The SP3223EH and SP3243EH devices can operate at a data rate of 460Kbps fully loaded. The SP3223EH is a 2-driver/2-receiver device, and the SP3243EH is a 3-driver/5-receiver device, ideal for portable or hand-held applications. The SP3243EH includes one complementary always-active receiver that can monitor an external device (such as a modem) in shutdown. This aids in protecting the UART or serial controller IC by preventing forward biasing of the protection diodes where V CC may be disconnected. The SP3223EH and SP3243EH series is an ideal choice for power sensitive designs. The SP3223EH and SP3243EH devices feature Auto-Online circuitry which reduces the power supply drain to a 1 µA supply current. In many portable or hand-held applications, an RS-232 cable can be disconnected or a connected periph- eral can be turned off. Under these conditions, the internal charge pump and the drivers will be shut down. Otherwise, the system automatically comes online. This feature allows design engineers to address power saving concerns without major design changes. THEORY OF OPERATION The SP3223EH and SP3243EH series is made up of four basic circuit blocks: 1. Drivers, 2. Receivers, 3. the Sipex proprietary charge pump, and 4. Auto-Online circuitry. Drivers The drivers are inverting level transmitters that convert TTL or CMOS logic levels to 5.0V EIA/ TIA-232 levels with an inverted sense relative to the input logic levels. Typically, the RS-232 output voltage swing is +5.4V with no load and +5V minimum fully loaded. The driver outputs are protected against infinite short-circuits to ground without degradation in reliability. These drivers comply with the EIA-TIA-232-F and all previous RS-232 versions. The drivers can guarantee a data rate over 460Kbps fully loaded with 3K Ω in parallel with 1000pF, ensuring compatibility with PC-to-PC communication software. The slew rate of the driver output is internally limited to a maximum of 30V/ µs in order to meet the EIA standards (EIA RS-232D 2.1.7, Paragraph 5). The transition of the loaded output from HIGH to LOW also meets the monotonicity requirements of the standard. Figure 11. Interface Circuitry Controlled by Micropro- cessor Supervisory Circuit SP3243EH 28 24 2 1 27 3 26 5K Ω 5K Ω 5K Ω 5K Ω 5K Ω GND C1+ C1- C2+ C2- V+ V- VCC 14 13 12 20 19 18 17 16 15 0.1 µF 0.1 µF 0.1 µF + C2 C5 C1 + + C3 C4 + + 0.1 µF 0.1 µF 9 10 11 4 5 6 7 8 RS-232 OUTPUTS RS-232 INPUTS 23 22 21 VCC 25 T 1IN R 1OUT R 1IN T 2OUT R 2OUT T 2IN T 3IN T 3OUT T 1OUT R 2IN R 3IN R 4IN R 5IN R 2OUT R 3OUT R 4OUT R 5OUT ONLINE SHUTDOWN STATUS UART or Serial µC µP Supervisor IC TxD RTS DTR RxD CTS DSR DCD RI VCC VIN RESET |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |