H7GP

5

Operation

■ DIP Switch Settings

Set all DIP switches before mounting the Counter to a control panel.

All switches are set toward the display panel before shipping.

H7GP-C/-CD

H7GP-T/-TD

Note: 1. When the setting has been changed, turned power off and

on to continue. The display will show “0” when the power is

turned back on.

2. The decimal point will flash every second when “99999.9 h”

is set.

■ Operating Modes

Nomenclature

Switch

Item

Function

3 (On right side

from front)

Input mode (note

1)

Display side

NPN

Terminal side

PNP

4 (On left side

from front)

Counting speed

(note 1)

Display side

30 Hz

Terminal side

5 kHz

Switch

Item

Function

3 (On right side

from front)

Input mode

(note 1)

Display side

NPN

Terminal side

PNP

4 (On left side

from front)

Time range

(note 1)

Display side

99999.9h

(note 2)

Terminal side

99 h 59 min

59 s

0

0.0h

999999

Total Counters

Time Counters

Reset input

Count input

Display

Start input

Display

Reset input

99999.9 h

(see note)

Note: The count value will return to "0" when "999999" is

exceeded.

The display and output are turned OFF when the power

supply turns OFF, but the count value is stored internally.

Note: Display values are shown for full scale set to 99999.9 h.

The count value will return to "0" when "99999.9" is

exceeded.

The display and output are turned OFF when the power

supply turns OFF, but the count value is stored internally.

1. Reset Key

Resets the count value, but will not operate while

the keys are protected.

2. Key Protection Indicator

Lit while the keys are protected. (Reset Key is

disabled.).

3. NPN/PNP DIP Switch

(Count or start with reset)

When the setting has been changed, turned power

off and on to continue. The display will show "0"

when the power is turned back on. See below for

details.

4. Counting Speed DIP Switch (H7GP-C)

Time Range DIP Switch (H7GP-T)

When the setting has been changed, turned power

off and on to continue. The display will show "0"

when the power is turned back on. Refer to DIP

Switch Setting for details.

4

2

1

3