MCP795B21 datasheet(15/54 Pages) MAS

15 / 54 page

 2011 Microchip Technology Inc.

Preliminary

DS22280A-page 15

MCP795WXX/MCP795BXX

CONTROL REG 0X08

CALIBRATION 0X09

OUT

SQWE

ALM1

ALM0

EXTOSC

RS2

RS1

RS0

bit 7

bit 6

bit 5

bit 4

bit 3

bit 2

bit 1

bit 0

Legend: R = Readable Bit W = Writable Bit U = Unimplemented bit, Read as ‘0’

bit 7

Bit 7 is the OUT bit, this sets the logic level on the CLKOUT when not using this as a square wave output.

bit 6

Bit 6 is the SQWE bit, setting this bit enables the divided output from the crystal oscillator.

bit 5:4

ALM1 Bits <5:4> determine which alarms are active.

- 00 – No Alarms are active

- 01 – Alarm 0 is active

- 10 – Alarm 1 is active

- 11 – Both Alarms are active

bit 3

Bit 3 is the EXTOSC enable bit. Setting this bit will allow an external 32.768 kHz signal to drive the RTCC

registers, eliminating the need for an external crystal.

bit 2:0

RS2 Bits <2:0> set the internal divider for the 32.768 kHz oscillator to be driven to the CLKOUT. The fol-

lowing frequencies are available. The output is responsive to the Calibration register.

- 000 – 1 Hz

- 001 – 4.096 kHz

- 010 – 8.192 kHz

- 011 – 32.768 kHz

- 1XX enables the Cal Output function. Cal output appears on CLKOUT if SQWE is set (1 Hz nominal).

Note:

When RS2 is set to enable the Cal Output function, the RTCC counters will continue to increment.

CALIBRATION

bit 7

bit 0

Legend: R = Readable Bit W = Writable Bit U = Unimplemented bit, Read as ‘0’

bit 7-0

Calibration Value

Note:

This is an 8-bit register that is used to add or subtract clocks from the RTCC counter every minute. The

CALSGN (0x03:7) is the sign bit and indicates if the count should be added or subtracted. The 8 bits in

the Calibration register, with each bit adding or subtracting two clocks, gives the user the ability to add or

subtract up to 510 clocks per minute.

MCP795B21 数据表(PDF) 15 Page - Micro Analog systems

MCP795B21 数据表(HTML) 15 Page - Micro Analog systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

数据表下载

链接网址

MCP795B21 数据表(PDF) 15 Page - Micro Analog systems

MCP795B21 数据表(HTML) 15 Page - Micro Analog systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

数据表 下载

链接网址

数据表下载