www.ti.com

Evaluating Performance with the ADCPro Software

9.1.2

GPIO Tab

When an input is selected to be a GPIO, its controls are enabled on the GPIO tab, shown in Figure 18. By

default, the GPIOs are enabled as inputs. Pressing the Input button reads the state of the enabled inputs;

if the input is high, the corresponding light turns green.

Figure 18. GPIO Tab

21

SBAU142B

– April 2009 – Revised May 2011

ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK

Submit Documentation Feedback

Copyright

© 2009–2011, Texas Instruments Incorporated