A sample application using Barcode Read Control

CCD trigger

output

ADC

#2

8 ch

0.5 s 1.0 s

CCD data

output

PMD

2 ch

12-bit ADC

12-bit ADC

SIO/UART

RAM

NANO

ARM

USB 2.0

Device

USB 2.0

Host

EtherMAC

CAN 2.0

SSP

(SPImode)

M

M

Data 2

Data 4

Data 6

Data 1

Data 3

ADC

#1

Data 5

Trigger

Timer

SW

The TMPM369 contains 2 units of ADC. Their combined use provides high-speed AD conversion. While a single ADC offers a

minimum conversion time of 1.0 s at 80 MHz, applying an analog signal to 2 units of ADC and using them in a time-interleaved

manner significantly reduces the conversion time required*.

*0.5 s minimum (design target)

High-speed AD conversion – Using 2 units of AD converter

The TMPM369 has various external communication interfaces such as USB device, USB host, CAN, EtherMAC, SIO/UART,

(PMD). All of them are designed to operate independently, significantly reducing the software workload. The TMPM369 provides

Flash ROM of up to 512 KB and SRAM of up to 128 KB to facilitate the use of the various communication interfaces.

Controls various interfaces independently – Contributing to reduction of the CPU workload

Features of the TMPM369FDFG/XBG (Under Development) and TMPM369FYFG/XBG (Under Development)

–