©2012 • KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6300 • www.kemet.com

62

62

Tantalum Capacitors

©2012 • KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864.963.6300 • www.kemet.com

Tantalum Through-Hole Capacitors • Molded Axial & Radial

T32X Series CX01/05 Style MIL-PRF-49137/1 & 5

Series

Dimensions

D x L x W (inches)

Capacitance Range

Benefits

A

0.095 x 0.260 x 0.020

0.10µF - 10µF

2 - 50 Volts

±20%, ±10%, ±5% capacitance tolerance

Tape and reel packaging available

MIL-PRF-4913/1 & 5 (CX01 & CX05) approved

Miniature - polar type

See www.kemet.com for QPL information

Available RoHS-compliant

•

•

•

•

•

•

•

B

0.110 x 0.290 x 0.020

0.33µF - 33µF

C

0.180 x 0.345 x 0.020

1.2µF - 68µF

D

0.180 x 0.420 x 0.020

2.µF - 68µF

E

0.280 x 0.530 x 0.025

5.6µF - 220µF

F

0.300 x 0.10 x 0.025

12.0µF - 330µF

Tantalum Through-Hole Capacitors • Radial Dipped

T396/T398 Series Three-Leaded UltraDip III

Series

Dimensions

W x T x H (inches)

Capacitance Range

Benefits

A

0.280 x 0.190 x 0.310/0.355

0.10µF - 10µF

• 3 - 50 Volts

• ±20%, ±10% capacitance tolerance

• Tape and reel packaging available

• Three lead design, fail-safe insertion

• Available RoHS-compliant

Note: “H“ dimension is for both T396/T398

B

0.280 x 0.190 x 0.320/0.365

0.4µF - 15µF

C

0.280 x 0.200 x 0.360/0.390

2.2µF - 22µF

D

0.280 x 0.200 x 0.30/0.390

3.3µF - 33µF

E

0.280 x 0.230 x 0.380/0.415

1.5µF - 4µF

F

0.280 x 0.240 x 0.410/0.430

3.3µF - 68µF

G

0.280 x 0.250 x 0.420/0.440

4.µF - 100µF

H

0.280 x 0.20 x 0.420/0.440

22.0µF - 150µF

J

0.300 x 0.300 x 0.460/0.480

6.8µF - 220µF

K

0.340 x 0.340 x 0.500/0.500

10.0µF - 330µF

L

0.340 x 0.340 x 0.560/0.580

15.0µF - 40µF

M

0.360 x 0.360 x 0.620/0.620

22.0µF - 680µF

All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.

All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to

constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only

by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this

Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or

results obtained.

Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures

may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as

installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property

damage.

Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other

measures may not be required.

Images may be enlarged to show detail.

Disclamer