Absolute maximum ratings and operating conditions

RHF310

4/22

Doc ID 15577 Rev 3

1

Absolute maximum ratings and operating conditions

Table 2.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

1.

All voltages values are measured with respect to the ground pin.

6V

2.

Differential voltage is the non-inverting input terminal with respect to the inverting input terminal.

±0.5

V

3.

±2.5

V

Storage temperature

-65 to +150

°C

Maximum junction temperature

150

°C

Thermal resistance junction to ambient area

50

°C/W

Thermal resistance junction to case

40

°C/W

4.

Short-circuits can cause excessive heating. Destructive dissipation can result from short circuit on

amplifiers.

830

mW

ESD

pins 1, 4, 5, 6, 7 and 8

pins 2 and 3

5.

Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a

1.5 k

Ω resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

2

0.5

kV

pins 1, 4, 5, 6, 7 and 8

pins 2 and 3

6.

This is a minimum value. Machine model: a 200 pF capacitor is charged to the specified voltage, then

discharged directly between two pins of the device with no external series resistor (internal resistor < 5

Ω).

This is done for all couples of connected pin combinations while the other pins are floating.

200

60

V

7.

Charged device model: all pins and package are charged together to the specified voltage and then

discharged directly to ground through only one pin. This is done for all pins.

1.5

kV

Latch-up immunity

200

mA

Table 3.

Operating conditions

Symbol

Parameter

Value

Unit

Supply voltage

4.5 to 5.5

V

Common-mode input voltage

V

1.

must dissipate in the application.

-55 to +125

°C