ST1843 - ST1845

Radiation characteristics

Doc ID 019049 Rev 1

9/25

6

Radiation characteristics

6.1

Total dose

The total dose results are provided in the following table:

These results are obtained on the following conditions:

6.1.1

Bias conditions and total dose level for total dose radiation testing

Continuous bias shall be applied during irradiation testing as specified below.

The total dose level applied shall be as specified in the component type variant information

here in or in purchaser order.

Figure 3.

Unbias conditions

Table 6.

Total dose performance

Device

Total dose

ST1843HR

50 krad (Si)

ST1845HR

100 krad (Si)