TS4621ML

Absolute maximum ratings and operating conditions

Doc ID 023181 Rev 1

5/40

1

Absolute maximum ratings and operating conditions

Table 1.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

1.

All voltage values are measured with respect to the ground pin.

5.5

V

Input voltage referred to ground

+/- 1.2

V

Control

input

voltage

EN, Gain

-0.3 to VDD

V

Storage temperature

-65 to +150

°C

2.

Thermal shutdown is activated when maximum junction temperature is reached.

150

°C

3.

The device is protected from overtemperature by a thermal shutdown mechanism, active at 150° C.

200

°C/W

Power dissipation

4.

Exceeding the power derating curves for long periods may provoke abnormal operation.

ESD

All pins

VOUTR, VOUTL vs. AGND

5.

Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a

1.5 k

Ω resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

2

4

kV

6.

Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5

Ω). This is done for all couples of

connected pin combinations while the other pins are floating.

100

V

Charge device model (CDM)

All pins

VOUTR, VOUTL

500

750

V

7.

The measurement is performed on an evaluation board, with ESD protection EMIF02-AV01F3.

+/- 8

+/- 15

kV

Lead temperature (soldering, 10 sec)

260

°C