Data brief

For further information contact your local STMicroelectronics sales office.

October 2010

Doc ID 18074 Rev 1

1/3

3

AD-ICD

In-circuit debugging adapter for ST7FLITEUx applications

Features

and an ST7FLiteUx microcontroller in a DIP16

package

package

target device in an SO8 package

Description

The AD-ICD in-circuit debugging adapter simply

connects to your application board in place of the

target microcontroller.

The AD-ICD can debug an application running on

an ST7FLITEUx microcontroller via a 10-pin ICC

connector to an ICD tool that uses the in-circuit

communication (ICC) protocol for ST7.

Once the AD-ICD’s microcontroller has been

programmed, it can run the application in place of

the target microcontroller in standalone mode,

without being connected to an in-circuit

debugging tool or the host PC.

Debugging uses a minimum of 4 pins on the

target ST7 microcontroller. To allow you to take

full advantage of the available pins on the target

device, the AD-ICD adapter uses a variant of the

target microcontroller with additional pins for ICD.

For in-circuit debugging of devices in DFN8

packages, users must order a DFN8 device

adapter (ST7MDT10-8/DVP).

Table 1.

Device summary

Part

number

Reference

AD-ICD

In-circuit debugging adapter for

ST7FLITEUx applications.

(Order code AD-ICD/ DS8Z-01)

www.st.com