Model Selection Guide

Notes:

Pin

Function

Pin

Function

1

AC-Neutral

7

3

AC-Line

10

12

Pin Connections

Model

Number

Input

Output

Output

Voltage

Accuracy

(%)

Efficiency

(%, Typ)

Voltage

(VDC)

Current

(mA Max.)

MPL-01S-05E

0.120

0.060

5.0

200

±5.0

66

MPL-01S-09E

0.120

0.060

9.0

111

±3.0

67

MPL-01S-12E

0.120

0.060

12.0

83.3

±3.0

70

MPL-01S-15E

0.120

0.060

15.0

66.6

±5.0

69

MPL-01S-24E

0.120

0.060

24.0

41.6

±5.0

68

Derating Curve

Mechanical Dimensions

MicroPower Direct

We Power Your Success - For Less!

292 Page Street Ste D Stoughton, MA 02072

•

TEL: (781) 344-8226

•

FAX: (781) 344-8481

•

E-Mail: sales@micropowerdirect.com

www.micropowerdirect.com

Typical Connection

1. It is recommended that an external fuse and NTC be used. The recommended

fuse is a 1.0A/250V slow blow and for the NTC, a 5D-9.

2. An external MOV is recommended on the input to protect the unit in the event of

a surge. A 561KD14 or equivalent is recommended.

The recommended value is 10 to 22 µF/400V.

4. Recommended output filtering capacitors are:

TVS

MPL-01S-05E

1.0 µF/50V

470 µF/35V

SMBJ7.0A

MPL-01S-09E

1.0 µF/50V

150 µF/35V

SMBJ12A

MPL-01S-12E

1.0 µF/50V

150 µF/35V

SMBJ20A

MPL-01S-15E

1.0 µF/50V

150 µF/35V

SMBJ20A

MPL-01S-24E

1.0 µF/50V

100 µF/35V

SMBJ30A

or above.

5. Input noise and surge suppression modules are available for a number of MPD

AC/DC power supplies.An MPL-01SE connection with theACFM-01 is illustrated

in the diagram at left. For pricing or full technical information on these modules

(ACFM-01 and ACFM-02) please contact the factory.

Notes:

1. For the 5V output model, accuracy is ±10% over the -40°C to +85°C temperature range.

2. Operation at no load will not damage the units, however, they may not meet all specifications.

3. All units are rated for EN 55022 (CE/RE) class A without external components. They will meet class B with

the addition of the ACFM-01 (or a similar discrete filter circuit). Contact the factory for more information.

4. To meet the requirements of EN 61000-4-3, (10V/m) external components are needed.This can be done

discretely, or with the addition of the ACFM-01. Contact the factory for more information.

5. To meet the requirements of EN 61000-4-4 (±4 kV), external components are needed.This can be done

discretely, or with the addition of the ACFM-01. Contact the factory for more information.

6. To meet the requirements of EN 61000-4-5 (±4 kV/±4 kV), external components are needed. This can be

done discretely, or with the addition of the ACFM-01. Contact the factory for more information.

7. To meet the requirements of EN 61000-4-6 (3V rms), external components are needed.This can be done

discretely, or with the addition of the ACFM-01. Contact the factory for more information.

8. It is recommended that a fuse be used on the input of a power supply for protection. For the

MPL-01SE series, a 1.0A/250 VAC slow blow should be used.

Input Voltage Vs Load

The diagram below illustrates a typical application connection of the MPL-01SE series. Notes on this circuit (starting with the input circuit) are: