April 2009

Doc ID 15614 Rev 1

1/15

15

SPZB260-PRO

Features

transceiver:

– 3 dBm nominal TX output power

– -95 dBm RX sensitivity

– + 5 dBm in boost mode

– RX filtering for co-existence with IEEE

802.11g and Bluetooth devices

– Integrated VCO and loop filter

interface of host microcontrollers (SPI)

program and data storage

power operation

(SIF)

indication / monitor

Applications

Description

SPZB260-PRO is a low power consumption

ZigBee® module optimized for embedded

applications. It enables OEMs to easily add

wireless capability to electronic devices.

The module is based on SN260 ZigBee® network

processor which integrates a 2.4 GHz, IEEE

802.15.4-compliant transceiver as well as IEEE

802.15.4 PHY and MAC.

24 MHz high stability crystal is integrated in the

module to perform the timing requirements as per

ZigBee® specifications.

A single supply voltage is requested to power the

module. A 2.5 GHz specific Murata antenna is

integrated in the module. The voltage supply

determines the I/O ports level allowing an easy

interface with the host system.

The module is controlled by means of a standard

serial interface (SPI) allowing the connections to a

variety of host microcontrollers.

For other information and details, please refer to

SN260 datasheet available at www.st.com

a.

SPZB260-PRO is based on the same unmodified HW

of SPZB260 module.

The same certification statements apply.

www.st.com