Data brief

For further information contact your local STMicroelectronics sales office.

February 2011

Doc ID 18403 Rev 1

1/7

7

STEVAL-PCC010V2

Ethernet with ST802RT1A and STM32F207

demonstration board

Features

ST802RT1A Ethernet PHY demonstration board:

transceiver

address, auto-negotiation, loopback, power

down, and MII/RMII configuration)

consumption measurement

– 20-pin full pitch header connector for debug

purposes (compatible with the STM32F207

controller board)

– RJ45 connector with embedded

transformer

– 40-pin connector footprint compatible with

the spirent communications SmartBits

200/2000 (SMB-200/ SMB-2000) analysis

system (connector is not assembled)

STM32F207 controller demonstration board:

based microcontroller with embedded Ethernet

MAC

button, and two LEDs

– 20-pin full pitch header connector for debug

purposes and compatibility with the

ST802RT1A demonstration board

– 20-pin JTAG connector

– Additional general purpose 20-pin full pitch

header connector

– USB device connector (+5 V0 Power

supply)

Description

The STEVAL-PCC010V2 demonstration board is

an evolution of the STEVAL-PCC010V1 and was

designed to allow evaluation of the ST802RT1A,

Fast Ethernet physical layer (PHY) interface

supporting 100BASE-TX and 10BASE-T

applications.

The PHY provides a media independent interface

(MII) and reduced media independent interface

(RMII) for easy attachment to a 10/100 media

access controllers (MAC).

Many jumpers, test points, and connectors on the

demonstration board enable to test the features

provided by the ST802RT1A Ethernet PHY. An

additional header connector allows connection to

the STM32F207 controller demonstration board

for an immediate evaluation of the complete

application – microcontroller and the physical

layer.

The controller board is pre-flashed with a web

server demo.

The STM32F207 controller demonstration board

is part of the STEVAL-PCC010V2 package

delivery.

STEVAL-PCC010V2

www.st.com