RN-USB datasheet(1/6 Pages) ETC2

部件名	RN-USB

功能描述	The RN-XV-EK is an evaluation platform for the RN-XV module.

PDF	6 Pages

Scroll/Zoom	100%

制造商	ETC2 [List of Unclassifed Manufacturers]

网页

标志

1 / 6 page

www.rovingnetworks.com

Version 0.01 9/25/2012

1

RN-XV-EK-DS

RN-XV-EK Evaluation Board

Features

•

Evaluation board for the RN-XV module, which is

based on Roving Networks’ robust RN-171 Wi-Fi

module

•

Supports several antenna options, depending on

the RN-XV module selected

•

WPS pushbutton for easy configuration

•

Reset pushbutton wakes the module

•

Standard USB connector

•

Hardware interface: USB via FTDI chipset

Applications

•

Industrial metering

•

HVAC control

•

Room temperature sensors

•

Pump configuration and control

•

Telemetry

•

PV/solar controllers

•

Robotics

Description

The RN-XV-EK is an evaluation platform for the RN-

XV module. The board connects to a PC via the

standard USB cable, and provides 2 pushbutton

switches to control WPS mode and to reset the

module. The board has connectors to drop in the RN-

XV, as well as headers that allow wires access to the

RN-XV signals.

Based on a pseudo standard footprint often found in

embedded applications, the RN-XV is a 802.11 b/g

solution for designers who want to migrate their

existing 802.15.4 architecture to a more standard

TCP/IP-based platform without redesigning their

existing hardware.

The RN-XV module is based on Roving Networks'

robust RN-171 Wi-Fi module and incorporates an

802.11 b/g radio, a 32-bit SPARC processor, a

TCP/TP stack, a real-time clock, a crypto accelerator,

power management unit, and an analog sensor

interface. The module is pre-loaded with firmware to

simplify integration and minimize applications

development time.

类似零件编号 - RN-USB

制造商	部件名	数据表	功能描述
List of Unclassifed Man...	RN-USB-SERIAL	867Kb / 14P	This document describes the hardware and software setup for Roving Networks RN-XV-RD2 evaluation board, which allows you to evaluate the RN-XV 802.11 b/g module.

More results

类似说明 - RN-USB

制造商	部件名	数据表	功能描述
ATMEL Corporation	AT91SAM9261-EK	690Kb / 26P	The AT91SAM9261-EK evaluation kit is an effective platform for evaluating chip performance and developing code for applications based on the AT91SAM92
EPCOS	B57238S0259L002	64Kb / 3P	Insulation Voltage 1000 VDC for 1 s, RN/RN = 15 %
List of Unclassifed Man...	RN-XV-RD2-EVAL-UM	867Kb / 14P	This document describes the hardware and software setup for Roving Networks RN-XV-RD2 evaluation board, which allows you to evaluate the RN-XV 802.11 b/g module.
	RN-41-DS	671Kb / 12P	RN-41/RN-41-N Class 1 Bluetooth Module
	RN-42-DS	765Kb / 12P	RN-42/RN-42-N Class 2 Bluetooth Module
	RN-4142-EK-UG	1Mb / 18P	RN-41-EK & RN-42-EK Evaluation Kit User?셲 Guide
	RN131C	863Kb / 18P	RN-131G & RN-131C 802.11 b/g Wireless LAN Module
	RN-131-DS	863Kb / 18P	RN-131G RN-131C 802.11 b/g Wireless LAN Module
STMicroelectronics	AN2542	783Kb / 16P	This board is designed for the evaluation of the BT-STA2416C2 receiver module in an A2DP 23-May-2007
Xilinx, Inc	EK-V6-ML605-G	1Mb / 2P	The Virtex짰-6 FPGA ML605 Evaluation Kit is the Xilinx base platform