MSB02001 datasheet(3/13 Pages) DBLECTRO

3 / 13 page

MSB

Electrical characteristics*

Approvals

Mechanical characteristics

Recommended/highest tightening torque

0.5/0.6 Nm (4.42/5.31 lbf in)

PCB thickness:

max. 2.4 mm (.094 in)

PCB hole diameter:

min. 1.1 mm (.043 in) / 1.3 mm (.051 in) for "T" version

Stripping length

5 ÷ 6 mm (.197 ÷ .24 in)

Operating temperature range

-40 °C ÷ +110 °C (-40 °F ÷ +230 °F)

Climatic category

40/110/21 According to EN 60068-1

Solid wire section

30÷16 AWG (UL)* 0.05÷1.5 mm² (IMQ)*

30÷14 AWG (UL)* 0.05÷1.5 mm² (IEC EN)* 55° and "T" versions

Stranded wire section

30÷16 AWG (UL)* 0.05÷1 mm² (IMQ)*

30÷14 AWG (UL)* 0.05÷1.5 mm² (IEC EN)* 55° and "T" versions

Rated voltage for 5 mm (.197 in) and 5.08 mm (.200 in)

300 V (UL)*

Rated voltage for 10 mm (.394 in) and 10.16 mm (.400 in)

750 V (IMQ)*

Rated current

17.5 A (IMQ)*

Contact resistance

<15 mΩ

Insulation resistance

>109 Ω (500V DC)

*All the above mentioned data refer to the highest values amongst the certiﬁed ones.

V voltage, I current values and tightening torque are related to the norms to be applied to the product and to its use.

IEC:

250 V - T 110 - 17.5 A - 1.5 mm2 solid (13.5 A - 1 mm2 stranded) for 5 mm and 5.08 mm pitch

EN 60998

250 V - T 110 - 17.5 A - 1.5 mm2 solid and stranded for 55° and "T" versions and 5 mm and 5.08 mm pitch

750 V - T 110 - 17.5 A - 1.5 mm2 solid (13.5 A - 1 mm2 stranded) for 10 mm and 10.16 mm pitch

750 V - T 110 - 17.5 A - 1.5 mm2 solid and stranded for 55° and "T" versions and 10 mm and 10.16 mm pitch

UL:

300 V - 13.5 A (factory wiring), 10 A (ﬁeld wiring) - 30÷16 AWG - 6 lbf·in for 5 mm, 5.08 mm pitch

File E167476

300 V - 17.5 A (factory wiring), 15 A (ﬁeld wiring) - 30÷14 AWG - 6 lbf·

in for 55° and "T" versions 5 mm, 5.08 mm pitch

600 V - 13.5 A (factory wiring), 10 A (ﬁeld wiring) - 30÷16 AWG - 6 lbf·in for 10 mm and 10.16 mm pitch

600 V - 17.5 A (factory wiring), 15 A (ﬁeld wiring) - 30÷14 AWG - 6 lbf·in for 55° and "T" versions 10 mm and 10.16 mm pitch

Application values for end-use equipment have to be in accordance to UL norms and applicable to them.

VDE:

250 V - 13.5 A - T 110 - 1 mm2

for 5 mm and 5.08 mm pitch

File n. 40022744

750 V - 13.5 A - T 110 - 1 mm2 for 10 mm and 10.16 mm pitch

IMQ:

250 V - T 110 - 17.5 A - 1.5 mm2 solid (13.5 A - 1 mm2 stranded) for 5 mm and 5.08 mm pitch

File: EC318

750 V - T 110 - 17.5 A - 1.5 mm2 solid (13.5 A - 1 mm2 stranded) for 10 mm and 10.16 mm pitch

M3 nickel plated copper alloy screw.

Polyamide housing.

Standard colour: GREEN.

V0 self-extinguishing according to UL 94.

Chlorinated solvents resistant,

with no phosphor, dioxin or

detrimental to health halogens.

Nickel plated copper alloy clamp

Easy to solder lead-free

tin-plated copper alloy pin.

Characteristics of components

MSB02001 数据表(PDF) 3 Page - DB Lectro Inc

MSB02001 数据表(HTML) 3 Page - DB Lectro Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13

数据表下载