A. Total regulation is defined as the maximum deviation from the nominal voltage for all steady-state conditions of initial voltage setting, input line voltage and

output load.

B. To maintain these regulation conditions, the 5.1 V current must be at least 1/4 of V2 and not greater than 5 times the V2 current.

C. Requires +5 V to be adjusted within ±1% with at least a 0.4 A load to maintain regulation on this output since its centering voltage tracks the V1 adjustment.

D. Requires +5 V to have at least a 0.4 A load.

E. Add “G” suffix to part number for RoHS compliant model. Contact factory for availability.

SL Power Electronics, Inc. 6050 King Drive, Bldg. A, Ventura, Ca 93003, USA. Phone:(805) 486 4565 Fax:(805) 487 8911 Email: condor@condordc.com. Rev. 8/18/2009.

Data Sheet © 2009 SL Power Electrontics Inc. The information and specifications contained in this data sheet are believed to be correct at time of publication.

However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.

GPC50 MECHANICAL SPECIFICATIONS

ENVIRONMENTAL SPECIFICATIONS OPERATING

NON-OPERATING

Temperature (A)

See individual specs. -40 to +85°C

Humidity (A)

0 to 95% RH

0 to 95% RH

Shock (C)

20 g

pk

40 g

pk

Altitude

-500 to 10,000 ft

-500 to 40,000 ft

Vibration (B)

1.5 g

2

/Hz

5 g

2

/Hz

A. Units should be allowed to warm up/operate under non-condensing

conditions before application of power.

B. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to

2000Hz, 3 orthogonal axes. Tested for 10 min./axis operating and

1 hr./axis non-operating.

C. Shock testing—half-sinusoidal, 10 ± 3 ms duration, ± direction, 3

orthogonal axes, total 6 shocks.

Commercial

Model

Output No.

Output

Output

Minimum

Output

Maximum

Output Peak

Noise P-P

Total

Regulation (A)

Notes

GPC50A

1

+5 V

0.4 A

5 A

7 A

50 mV

2%

2

+12 V

0 A

2 A

3 A

120 mV

5%

B,C,D

3

-12 V

0 A

0.5 A

1 A

120 mV

3%

D

GPC50F

1

+5 V

0.4 A

5 A

7 A

50 mV

2%

2

+12 V

0 A

1.2 A

1.5 A

120 mV

3%

D

3

-12 V

0 A

0.5 A

1 A

120 mV

3%

D