P13/13

Version 0.6 Preliminary, Sept 2011

ML2002 Preliminary

Example :

Note : COM1A and COM1B shall cover half of the Viewing Area (ie. Area = 1,300mm

Each Common shall not connect to each other.

Version 0.1 – Preliminary

Version 0.2 – Change Alignment mark co-ordinate on page 7

Add application note on page 12

Modify Application Circuit on page 8 – 10.

Updating Feature list on page 1

Updating Functional Description on page 4

Version 0.3 – Change Supply current condition with disable oscillator and internal PVDD opamp

Remove Real time clock in block diagram

Version 0.4 – Add Application Note when glass size area is larger than 2000mm

Version 0.5 – Add Timing diagram for using large LCD panel

Version 0.6 – Add remark on page 8, for FIN connect to GND if OOUT don’t connect with FIN.

Revision History