2 of 3

______________________________________________________________________________________________________________________________

Notes:

1 Ault #3 Connector

2. Center Contact = Positive

3. Connector is Switchcraft 760 plug or equivalent.

5. Other output connector options are available. Contact your

local representative for details.

4. Suggested Mating Connector is Switchcraft 712A jack or

equivalent.

WALL-PLUG OPTIONS

IEC320

IEC320

IEC320

N. America

N. America

Europe

United

Australia

C14

C18

C8

Japan

Japan

Kingdom

Grounded

Ungrounded

"Shaver"

Interchangeable

Fixed

Fixed

Fixed

Fixed

(F)

(Q)

(N)

(B)

(C)

(M)

(G)

(H)

Notes:

3. Blade Kit is available which will include one each of a EU, UK, and Aust blade. Kit part number is

KT1027K . Can be used with (B) version only, to allow blades to be interchanged.

1. For Desktop options, choose the applicable letter above.

2. For Wall-plug options, choose the applicable letter above. The model will then be fitted only with the

receptacle chosen. The North American blade version (B) will be an interchangeable blade. The other

options (C), (M), (G), and (H), will be fixed blades molded in the case.

DESKTOP OPTIONS

Model Number

Volts (V)

Output Current (max)

Max Watts

Ripple (Vp-p max)

PW170KB0503F01

5 V

2.00 A

10.0 W

50mV

PW170KB0603F01

6 V

1.67 A

12.0 W

60mV

PW170KB0903F01

9 V

1.50 A

13.5 W

90mV

PW170KB1203F01

12 V

1.20 A

15.0 W

120mV

PW170KB1503F01

15 V

1.00 A

15.0 W

150mV

PW170KB1803F01

18 V

0.84 A

15.0 W

180mV

PW170KB2403F01

24 V

0.63 A

15.12 W

240mV

PW170KB4803F01

48 V

0.32 A

14.88 W

480mV

Note: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.

Input Receptacle Options

Output Connector

2007 Energy Independence and Security Act - EISA

The Energy Independence and Security Act of 2007 was passed in December of 2007 and addresses minimum efficiency standards and standby

levels for Class A external power supplies that are 250 Watts and under. This law stipulates that external power supplies manufactured on July 1,

2008 and beyond meet certain minimum efficiency and standby criteria as defined below.

Minimum Efficiency Criteria:

Active mode is defined as when a power supply’s input is connected to a line voltage AC and it’s output is connected to a DC or AC load, drawing a

portion of the product’s power output. Depending upon the power rating for the power supply, it must meet the minimum efficiency criteria outlined

below.

Energy-Efficiency Criteria for Active Mode:

Output Power on Adapter Label

0 to < 1 Watt

> 1 watt to ≤ 51 watts

> 51 watts

Minimum Average Efficiency Percentage

≥

0.50 * output power on the label

≥

[0.09 * Ln (output power on adapter label)] + 0.50

≥

0.85

Energy Consumption Criteria for No Load Mode:

The power supply must also meet a requirement for when its input is connected to line voltage AC but its output is not connected to a load.

Depending upon the power output of the supply, it must keep its energy consumption below the following values:

Output Power on Adapter Label

0 to < 250 Watts

Maximum Power Consumption in No-Load Mode

≤

0.50 watts

ITE Switch Mode Power Supply

3 Year Warranty

PW170KB

Universal 10-15 Watt Series