| 数据搜索系统,热门电子元器件搜索 |
|
ADP196ACBZ-R7 数据表(PDF) 1 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP196ACBZ-R7 数据表(HTML) 1 Page - Analog Devices |
|
1 / 12 page ![]() 5 V, 3 A, Logic Controlled High-Side Power Switch Data Sheet ADP196 Rev. 0 Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2013 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com FEATURES Low RDSON: 10 mΩ (WLCSP) or 27 mΩ (LFCSP) Wide input voltage range: 1.8 V to 5.5 V Quick output discharge (QOD) circuit (ADP196-01) 3 A continuous operating current to 70°C 1.2 V logic-compatible enable input Low 25 μA quiescent current, VIN = 1.8 V Low 40 μA quiescent current, VIN = 5.5 V Overtemperature and overcurrent protection Ultralow shutdown current: <1 μA Ultrasmall 1.0 mm × 1.5 mm, 0.5 mm pitch, 6-ball WLCSP Tiny 2.0 mm × 2.0 mm × 0.55 mm, 0.65 mm pitch, 6-lead LFCSP APPLICATIONS Mobile phones Digital cameras and audio devices Portable and battery-powered equipment TYPICAL APPLICATION CIRCUIT GND EN LOAD VIN VOUT ADP196 CHARGE PUMP OVERCURRENT AND SLEW RATE CONTROL OFF ON + – OVERTEMPERATURE PROTECTION Figure 1. GENERAL DESCRIPTION The ADP196 is a high-side load switch designed for operation from 1.8 V to 5.5 V. This load switch provides power domain isolation, helping to extend battery operation. The device contains a low on-resistance, N-channel MOSFET that supports more than 3 A of continuous current and minimizes power loss. In addition, RDSON is constant, independent of the VIN voltage. The low 25 μA quiescent current and ultralow shutdown current make the ADP196 ideal for battery-powered portable equipment. The built-in level shifter for enable logic makes the ADP196 compatible with many processors and GPIO controllers. Overtemperature protection circuitry is activated if the junction temperature exceeds 125°C, thereby protecting the ADP196 and downstream circuits from potential damage. Overcurrent pro- tection is provided in the form of constant current limiting. The ADP196-01 incorporates an internal quick output discharge circuit to discharge the output capacitance when the ADP196-01 output is disabled. The ADP196 in the WLCSP package occupies minimal printed circuit board (PCB) area with a footprint of less than 1.5 mm2 and a height of 0.60 mm. The ADP196 is available in an ultrasmall, 1.0 mm × 1.5 mm, 0.5 mm pitch, 6-ball WLCSP and a 2.0 mm × 2.0 mm × 0.55 mm, 0.65 mm pitch, 6-lead LFCSP. |
类似零件编号 - ADP196ACBZ-R7 |
|
类似说明 - ADP196ACBZ-R7 |
|
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |