Ramp/Soak Process Controller

E5CK--T

A--182

J Characteristics

Indication accuracy

(S

N t 1)

Thermocouple

±0.3% of indication value or ±1°C, whichever greater, ±1 digit max.

y

(See Note 1)

Platinum

resistance

thermometer

±0.2% of indication value or ±0.8°C, whichever greater, ±1 digit max.

Analog input

±0.2% of indication value, ±1 digit max.

Hysteresis

0.01% to 99.99% FS (in units of 0.01% FS)

Proportional band (P)

0.1% to 999.9% FS (in units of 0.1% FS)

Integral (reset) time (I)

0 to 3,999 s (in units of 1 s)

Derivative (rate) time (D)

0 to 3,999 s (in units of 1 s)

Control period

1 to 99 s (in units of 1 s)

Manual reset value

0.0% to 100.0% (in units of 0.1%)

Alarm setting range

--1,999 to 9,999 or --199.9 or 999.9 (decimal point position dependent on input type)

Set time

0to99hrs 59 minor0to 99 min59s

Program capacity

1 pattern, 16 steps (possible to use up to 4 patterns with the communications func-

tion.)

Programming method

Time or ramp setting method

Time accuracy

±0.2% (±500 ms) of the set value

Sampling period

(S

N t 2)

Temperature input

250 ms

p

g p

(See Note 2)

Analog input

100 ms

Insulation resistance

20 M

Ω min. (at 500 VDC)

Dielectric strength

2,000 VAC, 50/60 Hz for 1 min between terminals of different polarities

Vibration resistance

Malfunction

Destruction

Shock resistance

Malfunction

applied to the relay)

Destruction

Ambient temperature

Operating

--10

°Cto55°C (with no icing)/3-year warranty period: --10°Cto50°C

p

Storage

--25

°Cto65°C (with no icing)

Ambient humidity

Operating

35% to 85%

Enclosure ratings

Front panel

NEMA 4 for indoor use (equivalent to IP66)

g

Rear case

IEC standard IP20

Terminals

IEC standard IP00

Memory protection

Non-volatile memory (number of writings: 100,000 operations)

Weight

Approx. 170 g;

Adapter: approx. 10 g

EMC

Emission Enclosure:

EN55011 Group 1 class A

Emission AC Mains:

EN55011 Group 1 class A

Immunity ESD:

EN61000-4-2:

4kV contact discharge (level 2)

8kV air discharge (level 3)

Immunity RF-interference:

ENV50140:

10V/m (amplitude modulated,

80 MHz to 1 GHz) (level 3)

10 V/m (pulse modulated, 900

MHz)

Immunity Conducted Disturbance: ENV50141:

10V (0.15 to 80 MHz ) (level 3)

Immunity Burst:

EN61000-4-4:

2kV power-line (level 3)

2kV I/O signal-line (level 4)

Approved standards

UL1092, CSA22.2 No. 14, CSA22.2 No. 1010-1

Conforms to EN50081-2, EN50082-2, EN61010-1 (IEC1010-1)

Conforms to VDE0106/part 100 (Finger Protection), when the separately-ordered

terminal cover is mounted.

Note: 1. The indication accuracy of the K1, T, and N thermocouples at a temperature of -100

°Cmax.is ±2°C ±1 digit maximum. The

indication accuracy of the U and L thermocouples at any temperature is

±2°C ±1 digit maximum.

The indication accuracy of the B thermocouple at a temperature of 400

°C max. is unrestricted.

The indication accuracy of the R and S thermocouples at a temperature of 200

°Cmax.is ±3°C ±1 digit maximum.

The indication accuracy of the W thermocouple at any temperature is (

±0.3% of the indicated value or ±3°C, whichever is great-

er)

±1 digit maximum. The indication accuracy of the PLII thermocouple at any temperature is (±0.3% or ±2°C, whichever is

greater)

±1 digit maximum.

2. The sampling period of the standard model with CT and remote SP inputs is 250 ms.