© 2008 Microchip Technology Inc.

Advance Information

DS41366A-page 1

High-Performance RISC CPU:

• Only 49 Instructions to Learn

• Operating Speed:

- DC – 32 MHz clock input

- DC – 125 ns instruction cycle

• Interrupt Capability with Automatic Context

Saving

• 16-Level Deep Hardware Stack with Optional

Overflow/Underflow Reset

• Direct, Indirect and Relative Addressing modes:

- Two full 16-bit File Select Registers (FSRs)

- FSRs can read program and data memory

Special Microcontroller Features:

• Precision Internal Oscillator:

- Factory calibrated to ±1%, typical

- Software selectable frequency range from

32 MHz to 31 kHz

• 31 kHz Low-Power Internal Oscillator

• External Oscillator Block with:

- 4 crystal/resonator modes up to 32 MHz

- 3 external clock modes up to 32 MHz

• 4x Phase Locked Loop (PLL)

• Fail-Safe Clock Monitor

• Two-Speed Start-up

• Power-Saving Sleep mode

• Power-on Reset (POR)

• Power-up Timer (PWRT)

• Oscillator Start-up Timer (OST)

• Brown-out Reset (BOR) with Selectable Trip Point

• Extended Watch-Dog Timer (WDT)

• In-Circuit Serial Programming™ (ICSP™) via two

pins

• In-Circuit Debug (ICD) via Two Pins

• Enhanced Low-Voltage Programming (LVP)

• Operating Voltage Range:

- 1.8V to 3.6V (PIC16LF194X)

- 1.8V to 5.5V (PIC16F194X)

• Programmable Code Protection

• Self-Programmable under Software Control

Low-Power Features:

• Standby Current (PIC16LF194X):

- 100 nA @ 1.8V, typical

• Operating Current (PIC16LF194X):

-150

μA @ 1 MHz, 1.8V, typical

• Low-Power Watchdog Timer Current

(PIC16LF194X):

-1.0

μA @ 1.8V, typical

Peripheral Features:

• Integrated LCD Controller:

- Up to 184 segments

- Variable clock input

- Contrast control

- Internal voltage reference selections

• Up to 53 I/O Pins and 1 Input-only Pin:

- High current sink/source for LED drivers

- Individually programmable interrupt-on-

change pins

- Individually programmable weak pull-ups

• Timer0: 8-Bit Timer/Counter with 8-Bit

Programmable Prescaler

• Enhanced Timer1:

- 16-bit timer/counter with prescaler

- External Gate Input mode

- Dedicated low-power 32 kHz oscillator driver

• Timer2, 4, 6: 8-Bit Timer/Counter with 8-Bit Period

Register, Prescaler and Postscaler

• Two Capture/Compare/PWM modules (CCP):

- Software selectable time bases

• Three Enhanced Capture, Compare, PWM

modules (ECCP):

- Software selectable time bases

- Auto-shutdown and auto-restart

- PWM steering

• Two Master Synchronous Serial Ports (MSSP)

- 7-bit address masking

• Two Enhanced Universal Synchronous Asynchro-

nous Receiver Transmitters (EUSART):

- RS-232, RS-485 and LIN compatible

- Auto-Baud Detect

- Auto-wake-up on start

• SR Latch (Integrated 555 Timer):

- Multiple Set/Reset input options

•

Analog-to-Digital Converter (ADC):

- 10-bit resolution

- Up to 17 channels

• 3 Comparators:

- Rail-to-rail inputs/outputs

- Power mode control

- Software controllable hysteresis

• Voltage Reference module:

- Fixed Voltage Reference (FVR) with 1.024V,

2.048V and 4.096V output levels

- 5-bit rail-to-rail resistive DAC with positive

and negative reference selection

• mTouch™ Oscillator Module

- 17 channels for button, sensor, or slider input

64-Pin 8-Bit Flash Microcontroller Product Brief

PIC16F194X/16LF194X