HCS473_13 datasheet(49/68 Pages) MICROCHIP

49 / 68 page

 2000-2013 Microchip Technology Inc.

Preliminary

DS40035D-page 49

HCS473

7.0

ELECTRICAL CHARACTERISTICS

7.1

Absolute Maximum Ratings

†

Ambient temperature under bias.......................................................................................................... -40°C to +125°C

Storage temperature ........................................................................................................................... -65°C to +150°C

Voltage on VDD w/respect to VSS .......................................................................................................... -0.3V to +7.5V

Voltage on LED w/respect to VSS .............................................................................................................-0.3V to +11V

Voltage on all other pins w/respect to VSS .......................................................................................-0.3V to VDD+0.3V

Total power dissipation(1) .................................................................................................................................. 500 mW

Maximum current out of VSS pin ........................................................................................................................ 100 mA

Maximum current into VDD pin ........................................................................................................................... 100 mA

Input clamp current, IIK (VI < 0 or VI > VDD) ....................................................................................................... ±20 mA

Output clamp current, IOK (Vo < 0 or Vo >VDD).................................................................................................. ±20 mA

Maximum output current sunk by any Output pin................................................................................................. 25 mA

Maximum output current sourced by any Output pin ........................................................................................... 25 mA

Note 1: Power dissipation is calculated as follows: PDIS=VDD x {IDD - Â IOH} + Â {(VDD-VOH) x IOH} + Â(VOl x IOL).

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

HCS473 数据表(PDF) 49 Page - Microchip Technology

HCS473 数据表(HTML) 49 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

数据表下载