3.7 x 3.1mm BUILT-IN CAPACITANCE CERAMIC RESONATOR

|||||||||||||| |

AWSCR-CV

30332 Esperanza, Rancho Santa Margarita, California 92688

Revised: 09.13.10

Visit www.abracon.com for Terms & Conditions of Sale

RoHS

Compliant

Pb in ceramic

(exempt per RoHS 2002/95/EC Annex (7))

• Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause

damage to the component.

• This component is not hermetically sealed. Do not clean or wash the component.

• Reflow soldering: Do not use strong acidity flux,such as flux with chlorine content of greater than 0.2wt% during reflow Soldering.

• Do not expose the component to open flame.

• This specification applies to the functionality of the component as a single unit. Customers are advised to insure that the component is thoroughly

evaluated in the particular application.

• Shelf life: The warranted shelf life of this product is six months after the delivery date under the conditions of sealed, unopened, original packaging.

• Storage conditions: If the product is to be stored for a period greater than six months after the delivery date, it is recommended that customers confirm

the solderability and characteristics for the product prior to use.

• This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-reliability, life-dependant

application. Contact Abracon Corporation prior to using this product when in doubt.

CAUTION

3.7 x 3.1mm

ABRACON IS

CERTIFIED

ABRACON IS

ISO9001:2008

CERTIFIED

AWSCR-CV

AWSCR-CV

Dimensions: mm

REFLOW PROFILE:

Peak:260℃max

250℃

Pre-heating

10s max

within

80-120s.

within

20-40s

30s min

230℃

150℃

100℃

specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For

applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for

more information.