MPX10 SERIES

4

Motorola Sensor Device Data

PRESSURE (P1)/VACUUM (P2) SIDE IDENTIFICATION TABLE

Motorola designates the two sides of the pressure sensor

as the Pressure (P1) side and the Vacuum (P2) side. The

Pressure (P1) side is the side containing silicone gel which

isolates the die from the environment. The Motorola MPX

pressure sensor is designed to operate with positive differen-

tial pressure applied, P1 > P2.

The Pressure (P1) side may be identified by using the table

below:

Part Number

Case Type

Pressure (P1) Side Identifier

MPX10D

Stainless Steel Cap

MPX10DP

344C–01

Side with Part Marking

MPX10GP

344B–01

Side with Port Attached

MPX10GVP

344D–01

Stainless Steel Cap

MPX10GS

344E–01

Side with Port Attached

MPX10GSX

344F–01

Side with Port Attached

ORDERING INFORMATION

MPX10 series pressure sensors are available in differential and gauge configurations. Devices are available in the basic

element package or with pressure port fittings which provide printed circuit board mounting ease and barbed hose pressure

connections.

Di

T

Oi

CT

MPX Series

Device Type

Options

Case Type

Order Number

Device Marking

Basic Element

Differential

Case 344–15

MPX10D

MPX10D

Ported Elements

Differential

Case 344C–01

MPX10DP

MPX10DP

Gauge

Case 344B–01

MPX10GP

MPX10GP

Gauge Vacuum

Case 344D–01

MPX10GVP

MPX10GVP

Gauge Stove Pipe

Case 344E–01

MPX10GS

MPX10D

Gauge Axial

Case 344F–01

MPX10GSX

MPX10D