MPX5010 SERIES

2

Motorola Sensor Device Data

Characteristic

Symbol

Min

Typ

Max

Unit

Pressure Range(1)

POP

0

—

10

kPa

Supply Voltage(2)

VS

4.75

5.0

5.25

Vdc

Supply Current

Io

—

7.0

10

mAdc

Minimum Pressure Offset(3)

(0 to 85

°C)

@ VS = 5.0 Volts

Voff

0

0.2

0.425

Vdc

Full Scale Output(4)

(0 to 85

°C)

@ VS = 5.0 Volts

VFSO

4.475

4.7

4.925

Vdc

Full Scale Span(5)

(0 to 85

°C)

@ VS = 5.0 Volts

VFSS

—

4.5

—

Vdc

Accuracy(6)

(0 to 85

°C)

—

—

—

±5.0

%VFSS

Sensitivity

V/P

—

450

—

mV/kPa

Response Time(7)

tR

—

1.0

—

ms

Output Source Current at Full Scale Output

IO+

—

0.1

—

mAdc

Warm–Up Time(8)

—

—

20

—

ms

Offset Stability(9)

—

—

±0.5

—

%VFSS

MECHANICAL CHARACTERISTICS

Characteristic

Symbol

Min

Typ

Max

Unit

Weight, Basic Element (Case 867)

—

—

4.0

—

Grams

Common Mode Line Pressure(10)

—

—

—

690

kPa

NOTES:

1. 1.0 kPa (kiloPascal) equals 0.145 psi.

2. Device is ratiometric within this specified excitation range.

3. Offset (Voff) is defined as the output voltage at the minimum rated pressure.

4. Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure.

5. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the

minimum rated pressure.

6. Accuracy (error budget) consists of the following:

• Linearity:

Output deviation from a straight line relationship with pressure over the specified pressure range.

• Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is

cycled to and from the minimum or maximum operating temperature points, with zero differential pressure

applied.

• Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from the

minimum or maximum rated pressure, at 25

°C.

• TcSpan:

Output deviation over the temperature range of 0

° to 85°C, relative to 25°C.

• TcOffset:

Output deviation with minimum rated pressure applied, over the temperature range of 0

° to 85°C, relative

to 25

°C.

• Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25°C.

7. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to

a specified step change in pressure.

8. Warm–up is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.

9. Offset stability is the product’s output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.

10. Common mode pressures beyond what is specified may result in leakage at the case–to–lead interface.