| 数据搜索系统,热门电子元器件搜索 |
|
PI3USB20LE 数据表(PDF) 3 Page - Pericom Semiconductor Corporation |
|
|
|||||||||||||||||||||||||||||
PI3USB20LE 数据表(HTML) 3 Page - Pericom Semiconductor Corporation |
|
3 / 6 page ![]() 3 PI3USB20 3.3V, Wide Bandwidth, 4-Channel, 2:1 Mux/DeMux USB 2.0 Switch PS8697B 02/01/05 Notes: 1. For max. or min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 3.3V, TA = 25C ambient and maximum loading. 3. Per TTL driven input (control inputs only); A and B pins do not contribute to ICC. Notes: 1. For max. or min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Guaranteed by design. 3. The bus switch contributes no propagational delay other than the RC delay of the On-Resistance of the switch and the load capacitance. The time constant for the switch alone is of the order of 0.25ns for 10pF load. Since this time constant is much smaller than the rise/fall times of typical driving signals, it adds very little propagational delay to the system. Propagational delay of the bus switch when used in a system is determined by the driving circuit on the driving side of the switch and its interactions with the load on the driven side. Power Supply Characteristics Parameters Description Test Conditions(1) Min. Typ.(2) Max. Units ICC Quiescent Power Supply Current VCC = Max., VIN = GND or VCC 800 µA Dynamic Electrical Characteristics Over the Operating Range (TA = –40°C to +85°C, VCC = 3.3V ±10%, GND = 0V) Parameters Description Test Conditions Min. Typ.(1) Max. Units XTALK Crosstalk RL = 100Ω, f = 250 MHz -27 dB OIRR OFF Isolation -32 BW Bandwidth -3dB RL = 100Ω 500 MHz Switching Characteristics Parameters Description Test Conditions Min. Typ.(1) Max. Units tPD Propagation Delay(2,3) 0.25 ns tPZH, tPZL Line Enable Time - SEL to YN, NI0, IN 0.5 15.0 tPHZ, tPLZ Line Disable Time - SEL to YN, NI0, IN 0.5 9.0 tSK(o) Output Skew between center port to any other port(2) 0.1 0.2 tSK(p) Skew between opposite transitions of the same output (tPHL - tPLH) (2) 0.1 0.2 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |