MPX700 SERIES

2

Motorola Sensor Device Data

MAXIMUM RATINGS

Rating

Symbol

Value

Unit

Overpressure(8) (P2

v 1 Atmosphere)

P1max

2800

kPa

Burst Pressure(8) (P2

v 1 Atmosphere)

P1burst

5000

kPa

Storage Temperature

Tstg

– 40 to +125

°C

Operating Temperature

TA

– 40 to +125

°C

Characteristic

Symbol

Min

Typ

Max

Unit

Pressure Range(1)

POP

0

—

700

kPa

Supply Voltage(2)

VS

—

3.0

6.0

Vdc

Supply Current

Io

—

6.0

—

mAdc

Full Scale Span(3)

VFSS

45

60

90

mV

Offset(4)

Voff

0

20

35

mV

Sensitivity

∆V/∆P

—

86

—

µV/kPa

Linearity(5)

MPX700D

MPX700A

—

– 0.5

– 1.0

—

—

0.5

1.0

%VFSS

Pressure Hysteresis(5) (0 to 700 kPa)

—

—

± 0.1

—

%VFSS

Temperature Hysteresis(5) (– 40

°C to +125°C)

—

—

± 0.5

—

%VFSS

Temperature Coefficient of Full Scale Span(5)

TCVFSS

– 0.21

—

– 0.15

%VFSS/°C

Temperature Coefficient of Offset(5)

TCVoff

—

±15

—

µV/°C

Temperature Coefficient of Resistance(5)

TCR

0.34

—

0.4

%Zin/°C

Input Impedance

Zin

400

—

550

Ω

Output Impedance

Zout

750

—

1800

Ω

Response Time(6) (10% to 90%)

tR

—

1.0

—

ms

Warm–Up (7)

—

—

20

—

ms

MECHANICAL CHARACTERISTICS

Characteristic

Symbol

Min

Typ

Max

Unit

Weight (Basic Element, Case 344–15)

—

—

2.0

—

Grams

NOTES:

1. 1.0 kPa (kiloPascal) equals 0.145 psi.

2. Device is ratiometric within this specified excitation range. Operating the device above the specified excitation range may induce additional

error due to device self–heating.

3. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the

minimum rated pressure.

4. Offset (Voff) is defined as the output voltage at the minimum rated pressure.

5. Accuracy (error budget) consists of the following:

• Linearity:

Output deviation from a straight line relationship with pressure, using end point method, over the specified

pressure range.

• Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is

cycled to and from the minimum or maximum operating temperature points, with zero differential pressure

applied.

• Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from the

minimum or maximum rated pressure, at 25

°C.

• TcSpan:

Output deviation at full rated pressure over the temperature range of 0 to 85

°C, relative to 25°C.

• TcOffset:

Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85

°C, relative

to 25

°C.

• TCR:

Zin deviation with minimum rated pressure applied, over the temperature range of – 40°C to +125°C,

relative to 25

°C.

6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to

a specified step change in pressure.

7. Warm–up is defined as the time required for the device to meet the specified output voltage after the pressure has been stabilized.

8. Basic Element only, Case 344–15.

9. P2 max : 500 kPa.