Absolute maximum ratings and operating conditions

TS922, TS922A

4/24

DocID5150 Rev 11

2

Absolute maximum ratings and operating conditions

Table 1. Absolute maximum ratings (AMR)

Symbol

Parameter

Value

Unit

1. All voltage values, except differential voltage are with respect to network ground terminal.

14

V

2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal. If

resistor must be added to limit the input current.

±1

3. Do not exceed 14 V.

Storage temperature

-65 to +150

°C

Flip-chip

SO8

TSSOP8

4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-

circuits on all amplifiers. These values are typical.

90

125

120

°C/W

Thermal resistance junction to case(4)

SO8

TSSOP8

40

37

Maximum junction temperature

150

°C

ESD

5. Human body model: 100 pF discharged through a 1.5 k

Ω resistor between two pins of the device, done for

all couples of pin combinations with other pins floating.

6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5

Ω). This is done for all couples of

pin combinations with other pins floating.

7. Charged device model: all pins and plus package are charged together to the specified voltage and then

discharged directly to ground.

2000

120

1500

V

Output short-circuit duration

excessive heating. The maximum output current is approximately 80 mA, independent of the magnitude of

Latch-up immunity

200

mA

Soldering temperature (10 s), leaded version

Soldering temperature (10 s), unleaded version

250

260

°C