| 数据搜索系统,热门电子元器件搜索 |
|
STBC21 数据表(PDF) 47 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STBC21 数据表(HTML) 47 Page - STMicroelectronics |
|
47 / 54 page ![]() STBC21 Charger, battery and alarm status registers Doc ID 023256 Rev 1 47/54 Appendix H Charger, battery and alarm status registers Table 41. Address: 11H, Reset state: 00000000 Bit Name Read/Write Function B7(MSB) VCC_uvlo Read 1: VCC undervoltage protection, valid only after initialization. Cleared at reset or sw_alarms_clr=Reg13H(5). B6 VCC_ovp Read 1: VCC over protection. Cleared at reset or sw_alarms_clr. B5 IBAT_ocp Read 1: IBAT over protection. Cleared at reset or sw_alarms_clr. B4 Batt_ovp Read 1: Battery overvoltage protection always active. Cleared at battery disconnection or sw_alarms_clr, disabled by Reg19H(6). B3 Batt_uvlo Read 1: Battery undervoltage protection valid only in fast-charge. Cleared at battery disconnection or sw_alarms_clr. B2 Batt_hot Read 1: Battery temperature too high. Cleared at battery disconnection or sw_alarms_clr. B1 Batt_detect_KO Read 1: Battery detection failed. Cleared at battery disconnection or sw_alarms_clr. B0(LSB) Batt_no_conn Read 1: Battery disconnected Table 42. Address: 12H, Reset state: 00000000 Bit Name Read/Write Function B7(MSB) ASD_mode Read 1: Automatic shutdown mode. B6 Thermal protection Read 1: Chip temperature over 115 ºC. B5 Batt_temp_alarm (T>60 ºC) Read 1: Battery temp. is out of range during charge. At the first occurrence it can be cleared if the battery temp. returns again in a good range; after the first one, a battery disconnection or sw_alarms_clr is needed. B4 Batt_temp_alarm (T>60 ºC or T<0 °C) Read 1: Battery temp. is out of range during charge. Cleared if battery temp. returns in a good range or at battery disconnection or sw_alarm_clr. B3 Batt_temp_soc (at batt. insertion) Read 1: Battery temp. is out of range at start of charge (battery connection). Cleared at battery disconnection or sw_alarms_clr or when temperature returns in good range. B2 Timer2_expired Read 1: Timer2 expired. Active only during fast-charge. Cleared at battery disconnection or sw_alarms_clr. B1 Timer1_expired Read 1: Timer1 expired. Active only during pre-charge. Cleared at battery disconnection or sw_alarms_clr. B0(LSB) 0 V-Chrg_alarm Read 1: Timer4 expired and battery still under 1 V. Cleared at battery disconnection or sw_alarms_clr. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |