CS1W-RPT01 datasheet(29/70 Pages) OMRON

29 / 70 page

Ordering Information

Basic Configuration Units ................................................................................18

Programming Devices...................................................................................... 22

Accessories and Maintenance Parts ...............................................................25

DIN Track Mounting Accessories .....................................................................25

Basic I/O Units .................................................................................................26

Special I/O Units, CPU Bus Units, and Inner Boards ......................................32

Replacing C200H I/O Units ..............................................................................54

Ordering Information

● International Standards

• The standards are abbreviated as follows: U: UL, U1:

UL (Class I Division 2 Products for Hazardous

Locations), C: CSA, UC: cULus, UC1: cULus (Class I

Division 2 Products for Hazardous Locations), CU:

cUL, N: NK, L: Lloyd, and CE: EC Directives.

• Contact your OMRON representative for further

details and applicable conditions for these standards.

● EC Directives

The EC Directives applicable to PLCs include the EMC

Directives and the Low Voltage Directive. OMRON

complies with these directives as described below

manufacturing installations.

● EMC Directives

Applicable Standards EMI:

EN61000-6-4

EN61131-2

EMS: EN61000-6-2

EN61131-2

OMRON PLCs conform to the related EMC standards

so that the devices and machines into which they are

built can more easily conform to EMC standards. The

actual PLCs have been checked for conformity to

EMC standards. Whether these standards are

satisfied for the actual system, however, must be

checked by the customer.

EMC-related performance will vary depending on the

configuration, wiring, and other conditions of the

equipment or control panel in which the PLC is

installed.

The customer must, therefore, perform final checks to

confirm that the overall machine or device conforms

to EMC standards.

● Low Voltage Directive

Applicable Standard: EN61131-2

Devices that operate at voltages from 50 to 1,000

VAC or 75 to 150 VDC must satisfy the appropriate

safety requirements. With PLCs, this applies to

Power Supply Units and I/O Units that operate in

these voltage ranges.

These Units have been designed to conform to

EN61131-2, which is the applicable standard for

PLCs.

CS1W-RPT01 数据表(PDF) 29 Page - Omron Electronics LLC

CS1W-RPT01 数据表(HTML) 29 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

数据表下载