TLV2711, TLV2711Y

Advanced LinCMOS

 RAIL-TO-RAIL

MICROPOWER SINGLE OPERATIONAL AMPLIFIERS

SLOS196A – AUGUST 1997 – REVISED MARCH 2001

4

POST OFFICE BOX 655303

12 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±5 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of short-circuit current (at or below) 25

°C (see Note 3)

unlimited

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total power dissipation

See Dissipation Rating Table

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

0

°C to 70°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TLV2711I

– 40

°C to 85°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: DBV package

260

°C

. . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltages, are with respect to VDD – .

2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows when input is brought

below VDD – – 0.3 V.

3. The output may be shorted to either supply. Temperature and /or supply voltages must be limited to ensure that the maximum

dissipation rating is not exceeded.

DISSIPATION RATING TABLE

PACKAGE

TA ≤ 25°C

DERATING FACTOR

TA = 70°C

TA = 85°C

PACKAGE

TA 25 C

POWER RATING

DERATING FACTOR

ABOVE TA = 25°C

TA = 70 C

POWER RATING

TA = 85 C

POWER RATING

DBV

150 mW

1.2 mW/

°C

96 mW

78 mW

recommended operating conditions

TLV2711C

TLV2711I

UNIT

MIN

MAX

MIN

MAX

UNIT

Supply voltage, VDD (see Note 1)

2.7

10

2.7

10

V

Input voltage range, VI

VDD –

VDD + – 1.3

VDD –

VDD + – 1.3

V

Common-mode input voltage, VIC

VDD –

VDD + – 1.3

VDD –

VDD + – 1.3

V

Operating free-air temperature, TA

0

70

–40

85

°C

NOTE 1: All voltage values, except differential voltages, are with respect to VDD – .