E3S

E3S

10

E39-L2 Mounting Bracket

Applicable Photoelectric Sensors:

E3S-5E41, E3S-R2E41,

E3S-DS30E41

E39-L4 Mounting Bracket

Applicable Photoelectric Sensors:

E3S-2E41, E3S-DS10E41

E39-G1 Sensitivity Adjuster Knob

This accessory is attached to the following models:

E3S-5E4(41), E3S-DS30E4(41), E3S-R2E4(41),

E3S-LS10XE4, E3S-LS20XE4, E3S-GS1E4, E3S-GS3E4

Note:

This adjuster cannot be used with Models

E3S-2DE4(41) and E3S-DS10E4(41).

Two, M4 slotted

hexagonal bolts

9.3 dia.

13 dia.

Two, M3

screws

E39-S1 Slit

Applicable Photoelectric Sensors:

E3S-5E4, E3S-5E41 (see note 3)

Note:

1. Model E39-S2 can have any of four different dimensions:

11 x 0.5 mm, 11 x 1 mm, 11 x 2 mm, and 11 x 4 mm.

2. Two slits (one for the emitter and the other for the receiver) are used in pairs.

3. Dimensions in parentheses are without the Spacer.

Use the Spacer with the E3S-2E4(41) as shown above to prevent the supporter

and mounting bracket from touching each other when the optical axis is adjusted.

The Spacer is not usually necessary with the E3S-5E4(41) unless the

E3S-2E4(41) and E3S-5E4(41) are directly mounted together.

E39-S1

Spacer