| 数据搜索系统,热门电子元器件搜索 |
|
33FJ128GP310 数据表(PDF) 27 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
33FJ128GP310 数据表(HTML) 27 Page - Microchip Technology |
|
27 / 90 page ![]() © 2005 Microchip Technology Inc. Preliminary DS70155C-page 25 dsPIC33F The PWM module has the following features: • Dedicated time base supports TCY/2 PWM edge resolution • Two output pins (pair) for each PWM generator • Complementary or independent operation for each output pin pair • Hardware dead-time generators for Complementary mode • Output pin polarity defined by nonvolatile device configuration bits • Multiple output modes: - Edge-Aligned mode - Center-Aligned mode - Center-Aligned mode with double updates - Single Event mode • Manual override register for PWM output pins • Hardware Fault input pins with programmable function • Trigger for synchronizing A/D samples and conversions to PWM timing • Each output pin associated with the PWM can be individually enabled 8.3.1 PWM TIME BASE The PWM time base is provided by a 15-bit timer with a prescaler and postscaler. The PWM time base can be configured for four different modes of operation: • Free-Running mode • Single-Shot mode • Continuous Up/Down Count mode • Continuous Up/Down Count mode with interrupts for double updates The Up/Down Counting modes support center-aligned PWM generation. The Single-Shot mode allows the PWM module to support pulse control of certain Electronically Commutated Motors (ECMs). Table 8-1 lists the frequencies and resolutions that can be attained as a function of the dsPIC33F device instruction cycle frequency. TABLE 8-1: EXAMPLE PWM FREQUENCIES AND RESOLUTIONS, 1:1 PRESCALER TCY (FCY) PTPER Value PWM Resolution PWM Frequency* 25 ns (40 MHz) 0x7FFF 16 bits 1220 Hz 25 ns (40 MHz) 0x03FF 11 bits 39.1 kHz 50 ns (20 MHz) 0x7FFF 16 bits 610 Hz 50 ns (20 MHz) 0x01FF 10 bits 39.1 kHz 100 ns (10 MHz) 0x7FFF 16 bits 305 Hz 100 ns (10 MHz) 0x00FF 9 bits 39.1 kHz 200 ns (5 MHz) 0x7FFF 16 bits 153 Hz 200 ns (5 MHz) 0x007F 8 bits 39.1 kHz * PWM frequencies will be 1/2 the value indicated for center-aligned operation. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |