STM8AF5178 datasheet(104/110 Pages) STMICROELECTRONICS

104 / 110 page

Revision history

STM8AF52/62xx, STM8AF51/61xx

104/110

Doc ID 14395 Rev 9

01-Jul-2009

Rev 4

Added ‘STM8AH61xx’ and ‘STM8AH51xx to document header.

Updated Features on page 1 (memories, timers, operating

temperature, ADC and I/Os).

Updated Table 1: Device summary.

Updated Kbytes value of program memory in Chapter 1: Introduction

Chapter 2: Description

– Changed the first two lines from the top.

Updated Figure 1: STM8A block diagram

Updated Chapter 5: Product overview

In Figure 5: LQFP 48-pin pinout, added USART function to pins 10,

11, and 12; added CAN Tx and CAN Rx functions to pins 35 and 36

respectively.

Section 6.2: Pin description

– Deleted text below the Table 12: Legend/abbreviation for the pin

description table

Table 13: STM8A microcontroller family pin description

– 68th, 69th pin (LQFP80): replaced X with a dash for PP output

– Added a table footnote

Updated Figure 7: Register and memory map

Table 14: Memory model 128K

– Updated footnote

Deleted the table “Stack and RAM partitioning“

Table 19: STM8A interrupt table.

– Updated priorities 13, 15, 17, 20 and 24

– Changed table footnote

Updated Chapter 7.2: Register map

Updated Table 39: Data memory, Table 40: I/O static characteristics,

and Table 41: NRST pin characteristics.

Section 10.1.1: Minimum and maximum values.

– Added ambient temperature TA = -40 °C

Updated Table 22: Voltage characteristics

Updated Table 23: Current characteristics

Updated Table 24: Thermal characteristics

UpdatedTable 26: General operating conditions

UpdatedTable 27: Operating conditions at power-up/power-down.

Figure 10: fCPUmax versus VDD.

– Updated temperature ranges in functional area

– Added a figure footnote

Removed ‘total current consumption’ and ‘note on the run-current

typical values’.

Replaced Table 28: Total current consumption in Run, Wait and Slow

mode. General conditions for VDD apply, TA = -40 °C to 150 °C

Replaced Table 29: Total current consumption in Halt and Active-halt

modes. General conditions for VDD applied. TA = -40 °C to 55 °C

unless otherwise stated.

Removed Table 21: Total current consumption in run, wait and slow

mode. General conditions for VDD apply. TA = -40 °C to 145 °C

Table 57.

Document revision history (continued)

Date

Revision

Changes

STM8AF5178 数据表(PDF) 104 Page - STMicroelectronics

STM8AF5178 数据表(HTML) 104 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载