| 数据搜索系统,热门电子元器件搜索 |
|
LM2902HD 数据表(PDF) 3 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LM2902HD 数据表(HTML) 3 Page - STMicroelectronics |
|
3 / 13 page ![]() LM2902H Absolute maximum ratings and operating conditions Doc ID 16486 Rev 1 3/13 2 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol Parameter Value Unit VCC Supply voltage(1) (VCC + - V CC -) 1. All voltage values, except differential voltages are with respect to ground terminal. +32 V Vid Differential input voltage(2) 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. +32 V Vin Input voltage -0.3 to 32 V Output short-circuit to ground(3) 3. Short-circuits from the output to VCC can cause excessive heating. The maximum output current is approximately 20 mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. 20 mA Iin Input current (4): Vin < VCC - DC AC (duty cycle = 10 %, T = 1 s) 4. This input current only exists when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the input PNP transistor becoming forward-biased and thereby acting as input diode clamp. In addition to this diode action, there is NPN parasitic action on the IC chip. This transistor action can cause the output voltages of the Op-amps to go to the VCC voltage level (or to ground for a large overdrive) for the time during which an input is driven negative. This is not destructive and normal output is restored for input voltages above -0.3 V. 5 50 mA Tj Maximum junction temperature 150 °C Rthja Thermal resistance junction to ambient (5) SO-14 5. Short-circuits can cause excessive heating and destructive dissipation. Values are typical and for a single layer PCB. 105 °C/W Rthjc Thermal resistance junction to case (5) SO-14 31 °C/W Tstg Storage temperature range -65 to +150 °C ESD HBM: human body model(6) 6. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5k Ω resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 370 V MM: machine model(7) 7. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while other pins are floating. 150 CDM: charged device model(8) 8. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground. 1500 Obsolete Product(s) - Obsolete Product(s) |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |