R07DS0730EJ0100 Rev.1.00

Page 1 of 16

Apr 25, 2012

PD166019T1F

Single P-Channel High-Side Intelligent Power Device

Description

The

PD166019 device is a P-channel high-side switch with diagnostic feedback and embedded protection functions.

Due to the adoption of P-channel output switch this device dose not contains charge pump circuit and switching time is

controllable by external resistance to IN pin.

Features

 Low noise by no built-in charge pump

 Low on-state resistance: 13.5 m

 Short circuit protection

 Shutdown by short-circuit detection

 Over temperature protection

 Shutdown with auto-restart on cooling

 Loss of GND protection

 Small multi-chip package: JEDEC 5-pin TO-252

 Built-in Diagnostic function

 Defined fault signal in case of thermal shutdown and/or short circuit shutdown via IN pin.

Ordering Information

Part No.

Lead Plating

Packing

Package

Sn

Tape 2500 p/reel

5-pin TO-252 (MP-3ZK)

Note:

*1 Pb-free (This product does not contain Pb in the external electrode.)

Application

 Light bulb (to 65 W) switching

 Switching of all types of 14 V DC grounded load, such as inductor, resistor and capacitor

 Replacement of fuse and relay

Note: The information contained in this document is the one that was obtained when the document was issued, and

may be subject to change.

R07DS0730EJ0100

Rev.1.00

Apr 25, 2012