iSensor

Preliminary Technical Data

ADISUSBZ

Rev. PrA

Information furnished by Analog Devices is believed to be accurate and reliable.

However, no responsibility is assumed by Analog Devices for its use, nor for any

infringements of patents or other rights of third parties that may result from its use.

Specifications subject to change without notice. No license is granted by implication

or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

www.analog.com

Fax: 781.326.8703

© 200

8 Analog Devices, Inc. All rights reserved.

GENERAL DESCRIPTION

The ADISUSB is a PC-USB evaluation system that enables basic

demonstration of many SPI-output iSensor

separately). It provides 2mm screw holes for simple attachment

of all iSensor

necessary cabling for connecting these devices to the USB port.

This system provides sensor data on-demand, through the USB,

at read rates up to 900SPS. Since the USB ports are serviced by

their PC’s interrupt structure, sampling in this system in not

perfectly coherent. However, in most PCs, the sample

coherence is sufficient for most datasheet parametric

verification, including in-run bias stability. This system will

run on MS Windows

Table 1. Kit Contents

1

1

2

1

1

ADISUSBZ PCB

A-to-B USB Cable, 6 feet

2mm stainless steel screws

12-pin, 2mm ribbon cable (ADIS16xxx/PCBZ)

i

Sensor

GETTING STARTED QUICKLY

Step #1 - Download software to PC

Software Downloads,” click on the appropriate software

package, and follow the prompts to save it to a temporary

location on the local PC. The iSensor

provides software packages as well, but the iSensor Evaluation

Tool web site provides the latest versions of each software

package.

Step #2 - Install evaluation software package

Unzip the installation package to a temporary location, and

then double-click on setup.exe, and follow the prompts. When

asked to replace system files, click “No,” and the evaluation

software will still work fine. Refer to Figure 1, Figure 2, and

Figure 3 for windows that will appear during this step.

Step #3 - Install giveio.exe driver

The giveio.exe driver is located in the software’s new directory,

which is normally under a subdirectory called “Analog Devices

i

Sensor

the file, giveio.exe, and follow the prompts to install this driver.

Refer to Figure 4, Figure 5, and Figure 6 for windows that will

appear during this Step.

Step #4 - Install USB driver

Connect the A-to-B USB cable to the PC, and then to the

ADISUSBZ PCB. The USB driver installation screen will

automatically appear on the screen in a few seconds. Follow the

prompts to install this driver. On some machines, the driver

installation screen will appear again, after clicking on “Finish.”

In this case, follow the prompts and complete the process. Refer

to Figure 7 and Figure 8 for the windows that will appear during

this step. Once complete, disconnect the cable from the

ADISUSBZ.

Step #5 - Connect ADIS16xxx/PCB to USB Interface PCB

Use the provided 2mm machine screws to secure the product

under test. Refer to Figure 9 through Figure 12 for alignment

assistance. The ADIS16xxx/PVBZ parts also require the 12-pin

ribbon cable installation displayed in these figures.

Table 2. JP1 Power Supply Settings

+3.3V

+5V

ADIS16003/PCBZ

ADIS16006/PCBZ

ADIS16201/PCBZ

ADIS16203/PCBZ

ADIS16204/PCBZ

ADIS16209/PCBZ

ADIS16003/PCBZ

ADIS16006/PCBZ

ADIS16080/PCBZ

ADIS16100/PCB

ADIS16250/PCBZ

ADIS16251/PCBZ

ADIS16255/PCBZ

ADIS16300AMLZ

ADIS16350AMLZ

ADIS16354AMLZ

ADIS16355AMLZ

ADIS16365AMLZ

Note: If a product is listed twice, it can be run at +3.3 or +5V.

Step #6 - Launch evaluation software

Hook the ADISUSBZ to the USB cable and then launch the

evaluation software by double clicking on its *.exe file. The

program will also be in the Start Programs menu in Windows.

Figure 15 though Figure 21 offers some basic insights into the

operation of each product’s evaluation software. Note to

European users: some software is sensitive to the decimal

notation. If large or unreasonable numbers are observed,

change the PC’s regional setting to USA. Software packages are

being updated to fix this, but were not complete at the time of

this document’s release.

ORDERING GUIDE

Model

Package Description

ADISUSBZ

i

Sensor™ PC-USB Evaluation System